Greenhouse Energy Consumption Calculator.
Estimate annual electricity and heating energy for a commercial greenhouse by climate zone and technology tier. Supplier-neutral scoping tool for electrical and boiler RFQs.
How much electricity does a greenhouse consume per m² per year?
Annual greenhouse consumption is estimated by summing load × operating hours for climate, irrigation, lighting and auxiliary systems, then dividing by covered area to get kWh/m²/yr and annual OPEX.
- Formula: kWh/yr = Σ (kW load × annual operating hours).
- Lighting is the single largest driver in winter-production facilities.
- kWh/m²/yr is the benchmark used to compare designs across climates.
- Pair the result with the CO₂ savings and solar ROI calculators for a full case.
Estimate only — not a quotation. Outputs are indicative planning ranges based on the values you enter and typical commercial benchmarks. Real pricing, specifications and lead times vary by country, site conditions and supplier, and are confirmed only in written offers collected through a private RFQ.
Project inputs
Excludes CO₂ dosing, artificial lighting and dehumidification. Add supplemental lighting separately for CEA / lettuce projects.
Turn this estimate into a qualified project
SeedMatchGroup is a supplier-neutral platform. We do not manufacture or resell equipment — we help buyers specify the project correctly, open one private RFQ to qualified global manufacturers, integrators and EPCs, and introduce relevant financing tracks.
Frequently asked questions
What can change the result?
This is a preliminary planning estimate based on the values you entered. The variables below usually move the outcome most, and should be confirmed with an agronomist, engineer and supplier offers before final design.
- Local climate: temperature, humidity, radiation and wind exposure
- Greenhouse type and technology level (tunnel, naturally ventilated, high-tech)
- Heating system, fuel type and winter set points
- Automation, sensors and climate-computer control level
- Energy and utility tariffs, plus tariff escalation over time
Questions this calculator answers
Typical buyer and investor searches this tool is built for, including the markets where we run the most commercial projects.
- greenhouse heating, cooling and energy cost per hectare for a commercial project
- greenhouse heating, cooling and energy cost for a 2-hectare project — India
- greenhouse heating, cooling and energy cost: indicative planning ranges — Kenya
- greenhouse heating, cooling and energy cost benchmarks for investors — Saudi Arabia
- greenhouse heating, cooling and energy cost under local market conditions — Mexico
- greenhouse heating, cooling and energy cost — what to specify in a supplier RFQ
Plan the project around the numbers
A calculator output is a starting point. Pair it with the planning guides below to align timeline, irrigation, budget and risk before you launch an RFQ.
One private brief, specialist review, private supplier research and a like-for-like comparison.
Month-by-month schedule from concept to first harvest across 9 stages.
Design principles for drip, pivot, fertigation and filtration on commercial projects.
How CAPEX, working capital and operating cost drive the project business case.
The ten most expensive planning and procurement pitfalls — and how to avoid them.
Procurement answers behind these numbers
A model output only holds if the scope, contract route and delivery terms match the assumptions. These reference answers cover the commercial decisions that move the figure.
- Turnkey EPC vs separate equipment packages
- What belongs in a greenhouse equipment specification
- Normal payment milestones in equipment contracts
- Which Incoterms to use for greenhouse and irrigation equipment
- How long a commercial greenhouse takes from order to handover
- What is normally the owner's scope on a greenhouse project
Move greenhouse energy consumption calculator. into a structured RFQ
Editorial · not a sales pitchCalculator outputs are indicative. When your numbers stabilise, a supplier-neutral RFQ turns those estimates into comparable offers from verified providers.
The facts a complete, supplier-neutral request on this topic includes. Use it as a checklist before submitting.
- Daily and peak load (kWh/day, kW) with the equipment driving it
- Grid status: none, unreliable, or grid-tied with export rules
- Site coordinates and available mounting area (ground or roof)
- Autonomy required and acceptable outage tolerance
- Existing generators, fuel cost and current tariff
- Whether storage, hybrid controllers or pump inverters are in scope
- Twelve months of electricity bills or generator fuel logs
- Equipment list with rated power
Opens the RFQ Builder scoped as an energy package so suppliers size generation and storage against your actual load profile. You stay in control — nothing is submitted until you review and confirm.
Free to submit · supplier-neutral · reviewed by a specialist before any supplier is contacted.
Running these numbers for a client project?
Agronomists, greenhouse and irrigation consultants use this calculator for feasibility, then hand the project to us for supplier shortlisting, RFQ preparation and quote comparison. You stay client-facing and we work through you.
Your client relationship stays with you — we work through you and never contact your client unless you ask.
Indicative only
- This tool is indicative only.
- It is not financial advice.
- It is not agronomic advice.
- It is not engineering design.
- Final numbers require supplier, agronomist, engineer and local regulatory review.
SeedMatch Group is an independent agricultural project sourcing and RFQ platform. We are not a farm, seed producer, fertilizer manufacturer, irrigation manufacturer, greenhouse builder, EPC contractor, lender or financial advisor. Supplier and project partner outreach is handled only after a commercial project brief is reviewed.
Supplier and manufacturer listings are provided for research, transparency and discovery only. SeedMatch Group does not provide automatic buyer-supplier introductions. Every agriculture project request is reviewed manually by David / SeedMatch Group, and supplier introductions are made only after internal approval.