Perguntas frequentes sobre o custo de estufas por país

Planning-level installed cost is roughly USD 45–110/m² for a shaded, naturally ventilated multi-span house, USD 110–220/m² for a fan-and-pad cooled multi-span, and USD 300–650/m² for a semi-closed or high-tech glass facility. One hectare therefore ranges from about USD 450K to USD 6.5M depending on how much of the summer the project must produce through, before site works, water treatment and land.

One hectare is 10,000 m². At Saudi bands that is roughly USD 450K–1.1M shaded, USD 1.1M–2.2M with pad-and-fan cooling and USD 3M–6.5M semi-closed, excluding reservoirs, reverse osmosis, power connection and land.

The load is reversed. There is almost no heating requirement, but cooling, shading, water treatment and dust management carry the budget. Capital sits in pads, fans, screens, reverse osmosis and storage rather than in boilers, energy screens and lighting.

Roughly USD 12–30/m²/year shaded, USD 30–65/m²/year with pad-and-fan and USD 70–150/m²/year semi-closed. Water production, cooling electricity and labour dominate; low power tariffs offset part of the high cooling demand.

Not always. It depends on the groundwater analysis at the site. Where salinity or sodium is too high for the crop, the project needs reverse osmosis or a treated/desalinated supply plus storage — which is why a recent water analysis is the first document a sourcing specialist asks for.

Relative to open-field farming, yes — a commercial greenhouse is a capital project, and Saudi projects start at roughly USD 450K per hectare even at the shaded, naturally ventilated level. Relative to other Gulf markets, Saudi pricing is moderate: low power tariffs reduce the cost of active cooling, and local demand has built a competitive installation market. The expensive decision is producing through the summer peak, which is what moves a project from the USD 45–110/m² band into the USD 300–650/m² semi-closed band.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For a Saudi site, enter a hot-arid climate, a 45–50 °C summer peak and the real water source (groundwater with its EC, or desalinated supply). The climate calculator will then size cooling, not heating, and the irrigation planner will show whether reverse osmosis and extra reservoir volume belong in the budget.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 60–145/m² for a snow-rated multi-span polyhouse, USD 180–400/m² for Venlo glass with heating, screens and CO₂, and USD 360–700/m² for a semi-closed or full-LED facility. One hectare therefore ranges from about USD 600K to USD 7M depending on technology level, before site works and land.

Two reasons: the structure must be engineered for provincial snow and wind loads, and the heating plant, twin screens and insulation must hold a crop climate through the site's winter design temperature — far colder in Quebec and the Prairies than in the Fraser Valley. Together those push installed cost roughly 15–30% above a temperate-maritime reference.

Operating cost is roughly USD 18–40/m²/year at mid-tech and USD 40–90/m²/year at high-tech, dominated by heat and, where winter supply is contracted, lighting electricity. Gas price, screen strategy and whether CHP is installed move that figure more than anything else.

One acre is 4,047 m². At Canadian bands that is roughly USD 240K–590K for a multi-span polyhouse, USD 730K–1.6M for Venlo glass and USD 1.5M–2.8M for a semi-closed facility, before site preparation, utilities and land.

No. They are planning bands for scoping and feasibility only. A lender needs supplier-backed pricing against a written specification, which is what the private RFQ process produces after a sourcing specialist reviews the project.

Not as sold for the Dutch market. A Venlo house is engineered to a specific snow and wind load, and the Dutch reference design assumes moderate loads. For Canada the same Venlo concept is re-engineered to the provincial code — heavier steel, closer truss spacing and gutter detailing — which is why the Canadian bands above sit roughly 15–30% over the Dutch reference. The structure type is suitable; the standard Dutch specification is not.

At Canadian planning bands, a 2-hectare project is roughly USD 1.2M–2.9M for a snow-rated polyhouse, USD 3.6M–8M for Venlo glass and USD 7.2M–14M for a semi-closed facility, before site works, utility connections and land. Large projects also gain some per-m² efficiency on shared heating, packing and utility infrastructure.

For a containerised package, FCA at the supplier's loading point or DAP to your site are the usual choices, with you (or your customs broker) clearing Canadian customs and paying duty and GST. DDP only works if the supplier acts as importer of record in Canada, which needs a CRA business number and CBSA CARM registration. Incoterms® 2020 do not cover installation or commissioning, so those belong in the contract scope.

Much colder. Environment Canada's 1981–2010 normals give about 3,400 heating degree-days a year at Windsor and 2,800 at Abbotsford, against roughly 4,500–5,000 at Montréal/Mirabel, Calgary, Lethbridge and Medicine Hat, where more than 20 nights a year fall below −20 °C. Heat plant, screens and the annual gas bill scale with that difference.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For a Canadian site, enter a cold-continental climate and the real winter design temperature for the municipality (National Building Code Table C-2). The climate calculator will then size the heat plant and screens, which is where most of the Canadian budget sits, and the irrigation planner will show the storage and treatment your water source needs.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

USD 20–40/m² com ventilação natural, 45–95 com painéis e ventiladores e 140–300 em vidro ou policarbonato de alta tecnologia. Um hectare fica em USD 200 mil–3 milhões antes de obras e terreno.

Um acre são 4.047 m²: aproximadamente USD 81–162 mil natural, 182–385 mil evaporativo e 570 mil–1,2 milhão alta tecnologia, sem nivelamento, tratamento, eletricidade e terreno.

Fabricação local, menos equipamentos e ausência de aquecimento e telas térmicas em grande parte do país. Em contrapartida, entram estrutura para monções, sombra, resfriamento e tratamento de água.

USD 4–10/m²/ano natural e 10–25 com painéis e ventiladores. Pesam trabalho, tratamento de água, insumos e eletricidade de bombas e ventiladores.

Não. São custos brutos antes de qualquer apoio central ou estadual. Elegibilidade depende do estado, programa e solicitante; nunca é presumida.

As diretrizes da Missão para o Desenvolvimento Integrado da Horticultura (MIDH) de 2025 (Anexo V, B.5) fixam um custo de referência de ₹1.000–1.200 por m² para estufa tubular com ventilação natural, ₹1.500–1.800 por m² com painéis e ventiladores e ₹710 por m² para telado de sombreamento; a taxa menor vale para estruturas maiores e as normas são 15% mais altas nos estados do Nordeste e do Himalaia e em outras áreas listadas. Com as mesmas taxas, um acre (4.047 m²) equivale a cerca de ₹40,5–48,6 lakh com ventilação natural e ₹60,7–72,8 lakh com painéis e ventiladores. As normas vão até 2.500 m² e o apoio é de 50% da norma para no máximo 2.500 m² por beneficiário (as diretrizes anteriores permitiam 4.000 m²). Para 2.500 m² com ventilação natural a ₹1.000/m²: 2.500 × ₹1.000 × 50% = ₹12,5 lakh, se toda a estrutura for calculada a essa taxa. As normas servem para calcular o apoio; não são preço de mercado nem cotação. Confirme a norma vigente e qualquer complemento estadual com a Missão de Horticultura do seu estado. As faixas desta página continuam sendo custo bruto.

Aplicam-se as mesmas faixas indianas: USD 20–40/m² natural, 45–95 evaporativo e 140–300 alta tecnologia; cerca de USD 81–162 mil por acre básico. Programas estaduais são avaliados separadamente e não deduzidos.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Informe clima quente úmido ou árido, monções e análise do poço. Revise ventilação, sombra e resfriamento, e se filtragem ou osmose reversa entram no orçamento.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

USD 45–110/m² em filme, 160–350/m² em Venlo com aquecimento, telas e CO₂, e 330–650/m² em semifechada ou LED completo. Um hectare fica em USD 450 mil–6,5 milhões antes de obras, armazenamento de água e terreno.

Pela concentração da cadeia de fornecimento e padronização. As faixas pressupõem cargas moderadas, fornecedores próximos e transporte curto; exportar o pacote aumenta o custo entregue.

Cerca de USD 15–35/m²/ano em tecnologia média, 40–95 em alta e 80–170 em semifechada com LED completo. Energia e estratégia de telas dominam.

A capacidade de conexão elétrica. Iluminação e bombas de calor dependem de conexão nem sempre disponível no porte ou data previstos; confirme antes.

USD 160–350/m² equivalem a aproximadamente USD 15–33/pé² instalados com aquecimento, telas, CO₂ e controle, sem obras, rede e terreno. Filme fica em USD 4–10/pé² e semifechada com LED, 31–60.

Cada estrutura é calculada para uma carga específica. O padrão neerlandês pressupõe cargas moderadas; regiões com mais neve exigem recalcular aço, treliças e calhas segundo a norma local. O conceito se transfere, a especificação padrão não.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Informe clima marítimo temperado, temperatura de projeto de −7 a −10 °C e iluminação prevista. Verifique aquecimento, desumidificação, recuperação e desinfecção da drenagem conforme regras de descarga.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

Planning-level installed cost is roughly USD 55–120/m² shaded, USD 130–250/m² pad-and-fan cooled and USD 350–700/m² semi-closed or mechanically cooled. One hectare is therefore about USD 550K to USD 7M, before water treatment, reservoirs, power connection and land.

Coastal humidity. Pad-and-fan cooling delivers a smaller temperature drop in humid coastal air, so year-round UAE projects move to mechanically cooled or semi-closed envelopes more often, and desalinated water carries a higher treatment and storage cost.

Roughly USD 15–35/m²/year shaded, USD 35–75/m²/year with pad-and-fan and USD 85–180/m²/year semi-closed. Cooling electricity and water production dominate the figure.

Not required, but common. Recirculating hydroponics reduces water consumption sharply, which is the main constraint in the country — that water saving, not yield alone, is usually what justifies the additional capital.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For a UAE site, enter a hot-arid climate, a 45 °C+ summer peak and the real coastal or inland humidity, plus the actual water source (desalinated supply or groundwater with its EC). The climate calculator will then show whether evaporative cooling is sufficient or mechanical cooling belongs in the budget.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 55–125/m² shaded, USD 130–250/m² pad-and-fan cooled and USD 350–700/m² semi-closed. One hectare is therefore about USD 550K to USD 7M, before water treatment, reservoirs, power connection and land.

It is common in newer projects, mainly because recirculating systems cut water consumption, and water is produced rather than pumped. The water saving usually carries the business case alongside the yield.

Roughly USD 15–35/m²/year shaded, USD 35–80/m²/year with pad-and-fan and USD 90–185/m²/year semi-closed. Cooling electricity and water production dominate.

Only with cooling designed for humid coastal conditions. Many projects deliberately stop or reduce output in peak summer instead, because the cooling capital and energy needed to continue outweigh the value of the extra weeks.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For a Qatari site, enter a hot-arid coastal climate with high summer humidity and the real water source (desalinated supply or saline groundwater with its EC). The climate calculator will show whether pad-and-fan holds the target temperature or mechanical cooling is required.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 25–65/m² for a locally fabricated plastic multi-span, USD 65–140/m² for a heated mid-tech house and USD 200–450/m² for Venlo glass. One hectare is therefore about USD 250K to USD 4.5M before site works and land.

Structures, films, ventilation and irrigation are manufactured domestically with local labour, which removes freight and import margin. The quality range is wide, so the specification — steel grade, galvanising, film warranty, wind and snow design load — has to be written down rather than assumed.

Substantially, where the resource exists. It raises capital cost through the well and heat-exchange plant but can cut heating operating cost far enough to justify a higher technology level and twelve-month production.

Roughly USD 8–22/m²/year for an unheated or lightly heated plastic house, USD 20–50/m²/year mid-tech and USD 45–110/m²/year high-tech. Heating source and labour dominate the difference.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For a Turkish site, enter a Mediterranean coastal climate (mild winter, hot dry summer) or a continental inland one with its real winter design temperature, and state whether geothermal heat is available. The climate calculator will then size heating realistically rather than assuming imported gas.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 12–30/m² for a tunnel or net house, USD 35–90/m² for a commercial galvanised multi-span with ventilation and fertigation, and USD 100–220/m² for an export-specification house. One hectare is therefore about USD 120K to USD 2.2M before water infrastructure, cold chain and land.

Highland temperatures remove almost the whole climate-control budget — no heating plant, no mechanical cooling, no energy screens. What is spent instead goes to ventilation, insect netting, water storage and post-harvest cooling.

Water and cold chain. A borehole, reservoir and dry-season storage plan, plus pre-cooling and cold rooms for export produce, regularly exceed the cost of the greenhouse structure itself and are the items most often left out of early budgets.

Roughly USD 4–12/m²/year for tunnels, USD 10–30/m²/year for commercial multi-span and USD 30–70/m²/year for export specification, driven by labour, pumping energy, crop protection and cold-chain electricity.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For a Kenyan site, enter a tropical-highland climate with the site altitude and the real water source (borehole yield or surface abstraction). The climate calculator will size ventilation and shading rather than heating or mechanical cooling, and the irrigation planner will show the dry-season storage the site needs.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 12–28/m² for a local tunnel or net house, USD 35–85/m² for a commercial galvanised multi-span and USD 95–210/m² for an export-specification greenhouse. One hectare is therefore about USD 120K to USD 2.1M before water infrastructure, cold chain and land.

The climate advantage is similar, but logistics are not. Land-locked freight through Djibouti, clearance time and foreign-exchange access add cost and schedule risk to every imported component, so the landed-cost calculation matters more than the equipment price.

Roughly USD 4–11/m²/year for tunnels, USD 9–28/m²/year for commercial multi-span and USD 28–65/m²/year for export specification. Labour is comparatively low; pumping energy, crop protection and cold-chain electricity dominate.

Rarely. At highland altitude the requirement is cool-night management and condensation control rather than a heating plant, which is why capital concentrates in structure, ventilation and water instead.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For an Ethiopian site, enter a tropical-highland climate with the site altitude and the real water source and dry-season availability. The climate calculator will size ventilation and shading rather than climate plant, and the irrigation planner will show the reservoir volume the seasonal rainfall demands.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

O preço depende do tipo: túnel, multi-capela ou high-tech. Consulte a tabela de faixas por m² e por hectare nesta página. São faixas de planeamento, não uma cotação; o preço final é definido por fornecedores independentes após a análise do projeto.

Aproximadamente USD 15–35/m² para estufa plástica ou túnel alto, USD 45–110/m² para multi-capela comercial com fertirrigação e USD 160–380/m² para vidro de alta tecnologia ou semifechado. Um hectare fica em torno de USD 150K a 3,8M antes de drenagem, infraestrutura de água e terreno.

O Golfo gasta o orçamento em resfriamento e água; o Brasil gasta em chuva e umidade. Calha alta, inclinação, carga estrutural, drenagem, área de ventilação e telas dominam a especificação, e o resfriamento mecânico raramente se justifica.

De forma relevante. Imposto, desembaraço e frete interno até as regiões produtoras somam-se a cada estrutura, filme, tela e componente de irrigação importado, por isso as propostas devem ser comparadas posto na obra e sobre uma única especificação escrita.

A SeedMatchGroup trabalha projetos agrícolas comerciais a partir de cerca de USD 250.000. Projetos menores são melhor atendidos por um fornecedor local direto.

O preço da estufa por m² varia pelo tipo: cerca de USD 15–35/m² para estufa plástica ou túnel alto, USD 45–110/m² para multi-capela comercial com fertirrigação e USD 160–380/m² para vidro de alta tecnologia ou semifechado. São faixas de planeamento, não cotação; o preço final é definido por fornecedores independentes após a análise do projeto.

Estufas agrícolas tropicais são projetadas para chuva intensa, umidade alta e pressão de doenças: pé-direito alto, ventilação natural ampla, drenagem reforçada e telas antiinsetos, em vez de aquecimento ou resfriamento mecânico. É o formato dominante da produção comercial brasileira de hortaliças e mudas.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Para um site brasileiro, informe clima tropical úmido ou subtropical com a chuva real e a fonte e qualidade de água efetivas. A calculadora de clima dimensionará ventilação e desumidificação em vez de resfriamento, e o planejador de irrigação mostrará a filtragem que uma captação superficial exige.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

Planning-level installed cost is roughly USD 45–110/m² shaded, USD 110–220/m² pad-and-fan cooled and USD 300–620/m² semi-closed. One hectare is therefore about USD 450K to USD 6.2M, before water treatment, reservoirs, the power connection and land.

The khareef monsoon cools and shades Dhofar through the summer, so a shaded, well-ventilated house can produce in months when a northern Omani site would need full pad-and-fan or mechanical cooling. The saving is in cooling plant and in running cost, not in the structure itself.

It depends on the water analysis. Brackish groundwater is common on the Batinah coast, and where salinity or sodium exceeds what the crop tolerates the project needs RO plus storage. A recent water analysis is the first document a sourcing specialist asks for.

Roughly USD 12–32/m²/year shaded, USD 32–70/m²/year with pad-and-fan and USD 80–165/m²/year semi-closed. Cooling electricity, water production and labour dominate the figure.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For an Omani site, enter a hot-arid climate with the real summer peak, and state whether the site is in Dhofar (khareef) or the north. Enter the actual groundwater EC — the irrigation planner will then show whether reverse osmosis and extra reservoir volume belong in the budget.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 35–85/m² shaded, USD 90–180/m² pad-and-fan cooled and USD 250–520/m² for a closed or semi-closed hydroponic house. One hectare is therefore about USD 350K to USD 5.2M, before water infrastructure, the power connection and land.

Because it changes the technology class. Drain recovery, disinfection and recirculating hydroponics cost more to build, but they cut water consumption per kilo produced far enough to make a limited allocation workable — which is usually the constraint that decides whether the project proceeds at all.

On the Amman and Mafraq plateau, yes — a modest heating circuit and thermal screen for the winter. In the Jordan Valley the winter is warm enough that heating is normally unnecessary, which is why the valley has long been the country's winter production area.

Roughly USD 10–28/m²/year shaded, USD 28–60/m²/year with pad-and-fan and USD 70–150/m²/year for a closed hydroponic house. Water, electricity and labour dominate, and electricity tariffs are high by regional standards.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For a Jordanian site, enter the real water allocation and source (well, network or treated wastewater) with its EC, and state whether the site is in the Jordan Valley or on the plateau. The irrigation planner will then size storage, filtration and drain recovery, and the climate calculator will add a winter heating load only where the altitude requires it.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 40–95/m² for a net house or shaded multi-span, USD 100–200/m² for a pad-and-fan cooled house and USD 300–600/m² for a semi-closed or high-tech facility. One hectare is therefore about USD 400K to USD 6M, before water infrastructure, the power connection and land.

Because much of it is not imported. Structures, screens, drip lines and fertigation equipment are manufactured domestically, so freight, duty and lead time on the main scope are lower — the gap between an ex-works and a landed price is smaller than almost anywhere else in the region.

It commonly does. Treated effluent and desalinated supply are widely used in Israeli horticulture, which shifts budget into filtration, disinfection, monitoring and fertigation control, and makes a current water analysis essential before any equipment is specified.

Roughly USD 10–28/m²/year for a net house, USD 30–65/m²/year with pad-and-fan and USD 75–155/m²/year semi-closed. Labour, electricity and water dominate; high labour cost is what usually justifies automation.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For an Israeli site, enter a Mediterranean or arid climate with high solar radiation and the real water source (reclaimed, desalinated or well) with its EC. The irrigation planner will then size filtration and disinfection, and the climate calculator will weight shading and cooling ahead of heating.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 25–70/m² for a plastic tunnel or shaded multi-span, USD 70–150/m² for a pad-and-fan cooled house and USD 220–480/m² for a semi-closed or high-tech facility. One hectare is therefore about USD 250K to USD 4.8M, before the filtration train, the power connection and land.

Local manufacturing and labour. Structures, films, screens and much of the irrigation package are produced domestically, and installation labour is inexpensive, so a comparable specification lands well below Saudi or UAE pricing. The imported high-tech portion — climate computers, specialist screens and films — still prices in hard currency.

It depends on the source. Nile canal water needs settlement and a substantial filtration train against silt and organic load; desert well water is often saline and may require reverse osmosis. A current water analysis decides which, and it is the first document a sourcing specialist asks for.

Roughly USD 8–22/m²/year for tunnels and shaded houses, USD 22–55/m²/year with pad-and-fan and USD 60–140/m²/year semi-closed. Labour is low, but water pumping, filtration and electricity or standby generation carry the figure at desert sites.

Yes, and many export programmes already do. Hydroponics adds substrate or gutter systems, a closed fertigation unit with drain recovery and disinfection, and tighter water-quality control — which is why hydroponic projects usually sit in the pad-and-fan or semi-closed bands rather than the tunnel band. The water analysis decides how much treatment the recirculating system needs.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For an Egyptian site, enter a hot-arid climate with the real water source — Nile canal water or desert well water with its EC. The irrigation planner will then size settlement and filtration or reverse osmosis, and the climate calculator will weight ventilation and cooling rather than heating.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 50–130/m² for a commercial polyhouse, USD 180–420/m² for high-tech glass or rigid cladding and USD 350–750/m² for a semi-closed full-LED facility. One hectare is therefore about USD 500K to USD 7.5M before site works, utilities and land.

One acre is 4,047 m². At these planning bands, the installed greenhouse package is roughly USD 200K–525K polyhouse, USD 730K–1.7M high-tech glass and USD 1.4M–3M semi-closed, before permits, utility upgrades and land.

Building loads and climate are different. Snow-rated northern structures, hurricane-rated coastal frames, desert cooling and humid-South dehumidification produce materially different specifications even at the same area.

No. It is an early feasibility band. A financing package needs a site-specific specification, utility evidence and comparable supplier offers produced through the human-reviewed RFQ process.

The planning bands convert to roughly USD 4.6–12 per square foot for a commercial polyhouse, USD 17–39/ft² for high-tech glass or rigid cladding and USD 33–70/ft² for a semi-closed full-LED facility, installed but before permits, utility upgrades and land.

The bands above are installed costs — structure, cladding, climate equipment and erection labour are included. What professional installation does not include is the 15–35% site-works allowance for engineering, permits, grading, stormwater and utility upgrades, which is priced separately per site.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For a US site, enter the state, local summer peak, winter design temperature, wind or snow exposure and actual utility tariffs. The calculators will then weight heating, cooling, water treatment and service capacity for the site rather than use a national average.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 40–100/m² for a Mediterranean multi-span plastic house, USD 150–340/m² for heated Venlo glass and USD 300–600/m² for a low-carbon semi-closed facility. One hectare is about USD 400K–6M before site works and land.

Northern and Atlantic projects spend more on heating, screens and humidity control; Mediterranean projects spend more on ventilation, shading and reliable irrigation water.

Planning bands run from about USD 12–32/m²/year for plastic houses to USD 38–90/m²/year for heated glass and USD 70–150/m²/year for semi-closed projects. The energy contract is the largest variable.

No. Figures are gross planning cost before any regional, national or EU support. Eligibility and award are independent and never assumed in the RFQ.

One hectare is 10,000 m², so at French planning bands the installed price is roughly USD 400K–1M for a Mediterranean plastic house, USD 1.5M–3.4M for heated Venlo glass and USD 3M–6M for a low-carbon semi-closed facility, before site works and land.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For France, enter the production basin and its winter design temperature, intended heat source and summer water allocation. Atlantic and Mediterranean projects should not use the same climate assumptions.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 55–130/m² for a heated multi-span polyhouse, USD 180–400/m² for Venlo glass and USD 360–700/m² for a low-carbon semi-closed facility. One hectare is about USD 550K–7M before site works and land.

Winter heat demand and low light are substantial. Heat source, screens, insulation, dehumidification and any LED schedule decide operating cost more than the frame itself.

Often, where heat pumps or high-level LED are planned. Available electrical capacity should be verified before equipment is specified because connection work can alter both cost and schedule.

No. These are gross planning bands. Any energy or agricultural support is assessed independently and should not be deducted until eligibility and award are confirmed.

The German planning bands are USD 55–130/m² for a heated multi-span polyhouse, USD 180–400/m² for Venlo glass and USD 360–700/m² for a low-carbon semi-closed facility, installed. Site works, grid connection and land are priced separately per site.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Germany, enter the local winter design temperature, snow load zone, heat source and available electrical capacity. The result should test energy screens and heat recovery before adding winter LED.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 80–170/m² for a snow-rated seasonal polyhouse, USD 220–480/m² for insulated Venlo glass and USD 420–800/m² for a full-LED semi-closed facility. One hectare is about USD 800K–8M before site works and land.

The structure carries high snow and wind loads, while winter crops need heating, energy screens, humidity control and long LED operating hours. Freight and specialist installation add further cost.

It can support the operating case, but tariff, demand charges and connection capacity are site-specific. A project should confirm the connection before assuming a lighting or heat-pump load.

Land, site preparation, electrical and heat connections, water infrastructure, packhouse and cold storage are excluded and must be added to the supplier package.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Norway, enter the municipality's snow and wind zone, winter design temperature, heat source and LED hours. A generic European climate profile will materially understate structure and energy requirements.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 65–150/m² for a snow-rated heated polyhouse, USD 200–450/m² for Venlo glass and USD 380–750/m² for a low-carbon semi-closed facility. One hectare is about USD 650K–7.5M before site works and land.

A competitive heat source, multiple energy screens, humidity control and an electrical connection sized for LED. Without those four, a year-round crop plan should not be assumed.

No. Temperature, reliability, distance and tariff matter. Biomass, heat pumps or industrial waste heat may fit better, and each requires different capital equipment.

No. Costs are gross planning bands before any independent energy or rural-development support, whose eligibility and award cannot be guaranteed.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Sweden, enter the regional snow load, winter design temperature, available district or biomass heat and planned LED hours. The climate calculator should test screens and heat recovery with those real utility inputs.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

USD 20–50/m² em telado ou plástico básico, 55–130 em multivão e 180–420 em vidro avançado ou semifechada. Um hectare fica em USD 200 mil–4,2 milhões antes de obras e terreno.

Altitude, calor, umidade e água variam. O planalto usa frequentemente ventilação passiva; o noroeste precisa de sombra e resfriamento; áreas úmidas, troca de ar e manejo sanitário.

Rastreabilidade, instalações laborais, manejo de resíduos, classificação, pré-resfriamento e transporte refrigerado estão fora da estufa, mas dentro do projeto.

Sim: acrescente câmbio, impostos, frete, seguro e entrega interna a telas, controle e hidroponia antes de comparar com fabricação local.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Informe estado, altitude, umidade de verão, concessão e análise da água e destino da produção. O Bajío não deve usar as mesmas hipóteses de Sinaloa ou da costa.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

USD 20–55/m² em plástico de Almería, 60–140 em multivão técnica e 180–400 em vidro ou semifechada. Um hectare fica em USD 200 mil–4 milhões antes de obras e terreno.

Estrutura passiva local, inverno ameno, cadeia concentrada e pouco aquecimento eliminam itens comuns no vidro norte-europeu.

Fonte legal, armazenamento, filtragem, conexão dessalinizada ou osmose reversa, fertirrigação e recuperação de drenagem em substrato.

Em geral não no plástico básico do sudeste. Inverno de alto valor, propagação e vidro podem usar aquecimento de baixa temperatura e telas, sobretudo fora das costas mais quentes.

Neste contexto é o raspa y amagado ou parral passivo de Almería, aquecido pelo sol sem caldeira: USD 20–55/m² ou 200–550 mil por hectare antes de reservatórios, tratamento e terreno. Clima ativo passa a USD 60–140/m².

USD 20–55 mil em parral, 60–140 mil em multivão e 180–400 mil em alta tecnologia. Geralmente são projetos menores; a elegibilidade depende do valor real e do mínimo de USD 250 mil, não apenas da área.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Informe região, radiação no verão, alocação da água e condutividade elétrica, e cultivo em solo ou substrato recirculante. Verifique reservatórios e recuperação de drenagem.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

Planning-level installed cost is roughly USD 70–160/m² for a typhoon-rated plastic multi-span, USD 220–480/m² for high-tech glass or rigid cladding and USD 420–850/m² for an automated semi-closed facility. One hectare is about USD 700K–8.5M before site works and land.

Typhoon or snow engineering, reinforced foundations, high labour cost, constrained sites and extensive automation all raise installed cost above many other Asian markets.

No. The required wind and snow class is prefecture-specific. Hokkaido prioritises snow and heat; Kyushu and coastal Honshu prioritise typhoon wind, cooling and humidity control.

Climate and fertigation automation are common at mid-tech level; robotic or automated crop handling, grading and internal transport appear where labour availability and crop value justify the extra capital.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Japan, enter the prefecture's typhoon wind and snow class, summer humidity, winter design temperature and utility tariffs. The climate result should reflect the regional balance between cooling, dehumidification and heating.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 55–140/m² for a commercial multi-span polyhouse, USD 200–450/m² for a high-tech glass or rigid-clad greenhouse and USD 380–750/m² for a semi-closed automated facility. One hectare is therefore about USD 550K–7.5M before site works, utilities and land.

At these planning bands, one hectare costs about USD 550K–1.4M for a multi-span polyhouse, USD 2M–4.5M for high-tech glass and USD 3.8M–7.5M for a semi-closed automated facility, before approvals, water infrastructure, utility connections and land.

Climate and structural exposure differ sharply. Southern sites spend more on heating and humidity control, hot dry regions spend more on shade, cooling and water security, and northern sites may require cyclone-rated structures and stronger humidity management.

Planning bands run from roughly USD 18–45/m²/year for a multi-span polyhouse to USD 50–120/m²/year for high-tech glass and USD 95–210/m²/year for semi-closed facilities. Energy, labour, water treatment and maintenance are the largest variables.

No. They are preliminary planning bands. A lender needs a site-specific specification, utility evidence, operating assumptions and comparable supplier offers produced through the human-reviewed RFQ process.

One acre is 4,047 m². At Australian planning bands that is roughly USD 220K–570K for a commercial multi-span polyhouse, USD 810K–1.8M for high-tech glass and USD 1.5M–3M for a semi-closed automated facility, before approvals, water infrastructure, utility connections and land.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Australia, enter the state and production basin, summer peak and winter design temperature, wind or cyclone exposure, water source and analysis, and actual electricity tariff. A Victorian project should not use the same heating and humidity assumptions as South Australia or Queensland.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Depende do tipo: macrotúnel, multi-capela ou vidro Venlo. Consulte a tabela de faixas por m² e por hectare nesta página. São faixas de planeamento, não uma cotação; o preço final é definido por fornecedores independentes após a análise do projeto.

Aproximadamente USD 25–60/m² para um macrotúnel plástico, USD 70–150/m² para uma multi-capela técnica com fertirrega e USD 190–420/m² para vidro Venlo ou semifechado. Um hectare corresponde a cerca de USD 250K a 4,2M antes de obras de terreno, infraestrutura de água e terreno.

A carga de vento atlântico e a chuva de inverno exigem estrutura, ancoragem e drenagem acima do formato passivo do parral almeriense, e uma cadeia de fornecimento interna menor implica mais conteúdo importado na mesma especificação.

Raramente como investimento principal. Os invernos amenos levam a maioria dos projetos a investir em ventilação, telas e controlo de humidade; o aquecimento de baixa temperatura aparece sobretudo em vidro com programas de inverno premium ou propagação.

As bandas de planeamento vão de cerca de USD 8–20/m²/ano num macrotúnel a USD 18–45/m²/ano numa multi-capela técnica e USD 45–110/m²/ano em vidro Venlo. Mão de obra, água, energia e fatores de produção são as maiores variáveis.

Não. São bandas preliminares de planeamento. Um financiador exige especificação específica do local, comprovação de água e energia, pressupostos operacionais e propostas comparáveis de fornecedores obtidas através do processo de RFQ com revisão humana.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Para um local em Portugal, indique a zona litoral ou interior com a exposição real ao vento, a chuva de inverno e o pico de verão, além da origem licenciada da água e da sua análise. O resultado climático deve apontar para ventilação e controlo de humidade, e não para uma central de aquecimento.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

Planning-level installed cost is roughly USD 45–85/m² for a reinforced mid-tech multi-span and USD 90–170/m² for smart-farm glass or high-spec multi-span — about USD 450K–1.7M per hectare before land and grid works. Planning ranges only.

Winter heating capacity, typhoon or snow structural design, summer humidity control, automation to offset labour scarcity, and energy tariffs for lighting and heat pumps.

Paprika, tomato, strawberry, cucumber and leafy greens dominate, with hydroponic smart-farm systems common at higher technology levels.

No. They are preliminary planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For South Korea, enter the province's winter design temperature, typhoon or snow class, summer humidity and actual electricity and fuel tariffs.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Indicatively USD 250–500 per m² for semi-closed cooled greenhouses, and considerably higher for multi-tier indoor farms with full LED, cooling and automation. Land tender, fit-out and utility capacity are excluded. Planning ranges only.

Land is scarce and projects are typically building-scale, so cost per square metre of growing or building area is more meaningful than cost per hectare.

Cooling electricity, followed by lighting in indoor facilities. Cooling strategy, LED efficiency and heat-rejection design decide the operating case.

No. They are preliminary planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Singapore, use cooling and dehumidification rather than heating, enter actual electricity tariffs and connection capacity, and size the project in building square metres.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Indicatively USD 500K–1.0M per hectare mid-tech and USD 1.0–1.8M per hectare for a high-tech glass complex including heat plant, before land and grid connection. Planning ranges only — final pricing comes from suppliers.

Indicatively 250–400 kWh/m²/year of heat at high-tech specification. Twin thermal screens and an insulated perimeter typically reduce that by 10–20%, depending on site design temperature and crop strategy.

Tomato and cucumber dominate industrial complexes; pepper and leafy greens serve secondary programmes.

No. They are preliminary planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Kazakhstan, enter the site's winter design temperature (−25 to −35 °C in the north), snow class, gas or CHP tariff and water analysis. The climate result should be heat-led.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Indicatively USD 1.8M–2.9M per hectare for snow-rated high-tech glass with twin screens, heat plant and climate control, and above USD 3.4M per hectare with full LED. Land, grid connection and packhouse excluded. Planning ranges only.

Heat plant capacity, LED lighting and grid connection, snow-load structure and multi-screen packages.

Tomato, cucumber, leafy greens and herbs for domestic retail under full lighting, plus berries and young plants.

No. They are preliminary planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Finland, enter the site's winter design temperature and snow class, the actual heat source and electricity contract, and planned lighting hours.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Indicatively USD 450K–900K per hectare mid-tech and USD 900K–1.6M per hectare high-tech, before land and solar. Planning ranges only.

With a mature installed base, retrofit often wins: screens, ventilation, automation, recirculating fertigation and PV typically cost USD 25K–260K per hectare per package.

Load-shedding can stop irrigation, climate control and cold rooms, so solar, storage or generators are sized with the project.

No. They are preliminary planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For South Africa, enter the region, hail and frost exposure, water licence and the power backup you plan.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Aproximadamente USD 25–65/m² para um túnel plástico passivo, USD 65–150/m² para uma multi-capela técnica e USD 190–420/m² para vidro de alta tecnologia ou semifechado. Um hectare ronda USD 250K–4,2M antes de obras de terreno e terreno.

Raramente como investimento principal. Os invernos amenos levam a maioria dos projetos a investir em ventilação, telas e controlo de humidade; o aquecimento de baixa temperatura aparece sobretudo em vidro com programas de inverno premium ou propagação.

A fonte legal de água, o armazenamento, a filtragem, qualquer ligação de água dessalinizada ou osmose inversa, a fertirrega e a recuperação de drenagem quando se usa substrato.

As bandas de planeamento vão de cerca de USD 8–22/m²/ano num túnel passivo a USD 20–48/m²/ano numa multi-capela técnica e USD 42–105/m²/ano em vidro de alta tecnologia. Mão de obra, água e energia são as maiores variáveis.

Não. São bandas preliminares de planeamento. Um financiador exige especificação específica do local, comprovação de água e energia, pressupostos operacionais e propostas comparáveis de fornecedores obtidas através do processo de RFQ com revisão humana.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Para um local em Chipre, indique a zona litoral ou interior com a exposição real ao calor do verão, além da origem licenciada da água e da sua análise. O resultado climático deve apontar para ventilação, sombreamento e controlo de humidade, e não para uma central de aquecimento.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

Faixas instaladas de planejamento: USD 18–50/m² em plástico passivo, 55–130/m² em multivão técnica e 180–400/m² em vidro ou semifechada. Um hectare fica em USD 180 mil–4 milhões antes de obras, infraestrutura hídrica e terreno.

Um hectare são 10.000 m²: USD 180–500 mil em plástico, 550 mil–1,3 milhão em multivão técnica e 1,8–4 milhões em vidro, sem reservatórios, dessalinização ou osmose reversa e terreno.

As principais bacias exportadoras têm água subterrânea limitada e frequentemente salina. Pode ser necessário abastecimento dessalinizado, osmose reversa, armazenamento e recuperação de drenagem. É investimento separado da irrigação.

Em geral não para hortaliças de exportação em Souss-Massa. Ventilação, telas e umidade pesam mais; aquecimento aparece em vidro ou no interior mais frio.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Informe região (Souss-Massa, Gharb ou Oriental), fonte real de água e condutividade elétrica e destino da exportação. Verifique reservatórios, osmose reversa e recuperação de drenagem antes da estrutura.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

Planning-level installed cost is roughly USD 50–120/m² for a heated multi-span polyhouse, USD 170–380/m² for Venlo glass and USD 340–650/m² for a semi-closed facility with LED. One hectare is about USD 500K–6.5M before site works and land.

Roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.5M semi-closed, excluding utility connection, foundations and land.

About USD 16–42/m²/year for a heated polyhouse, USD 45–100/m²/year for Venlo glass and USD 80–165/m²/year semi-closed. Heating energy and labour dominate.

Eligible projects may use EU CAP Strategic Plan investment measures administered nationally, subject to the current call rules. These bands are not a funding application; lenders and agencies require a site-specific specification and comparable supplier offers.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Romania, enter the county, winter design temperature, energy source and whether production runs through winter. The climate calculator will size heating and screens; the budget changes most with year-round versus seasonal production.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Planning-level installed cost is roughly USD 50–120/m² for a heated polyhouse, USD 170–380/m² for Venlo glass and USD 340–680/m² for semi-closed with LED. One hectare is about USD 500K–6.8M before site works and land.

Roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.8M semi-closed with LED, excluding utility connection and land.

Only for winter supply programmes. Lighting adds significant capital and electricity cost, so many projects start with heated glass and add LED in a later phase.

About USD 16–42/m²/year heated polyhouse, USD 45–100/m²/year Venlo glass and USD 80–170/m²/year semi-closed with LED. Energy and labour dominate.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Poland, enter the voivodeship, winter design temperature, energy source and lighting plan. The climate calculator will size heating and screens; test lighting as a separate phase.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

Aproximadamente USD 20–55/m² para túneis espanhóis, USD 180–400/m² para vidro Venlo e USD 350–700/m² para semifechado com LED. Um hectare ronda USD 200K–7M antes de obras de terreno e terreno.

Nas bandas britânicas, uma estufa Venlo aquecida ronda USD 1,8M–4M por hectare, e uma instalação semifechada com LED USD 3,5M–7M, excluindo terraplenagem, ligação à rede e terreno.

A licença de construção e a capacidade de ligação à rede definem frequentemente o calendário, pelo que devem ser investigadas antes da aquisição da estrutura.

Cerca de USD 45–105/m²/ano para vidro Venlo aquecido e USD 85–175/m²/ano para semifechado com LED. Energia e mão de obra dominam; os túneis ficam em USD 8–20/m²/ano.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Para o Reino Unido, indique a região, a exposição ao vento, a fonte de energia (incluindo eventual calor recuperado) e se a produção decorre durante o inverno. Teste a iluminação e a capacidade da rede como linhas separadas.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

Planning-level installed cost is roughly USD 25–65/m² for a southern plastic multi-span, USD 70–150/m² for a heated technical multi-span and USD 180–400/m² for Venlo glass. One hectare is about USD 250K–4M before site works and land.

Roughly USD 250K–650K southern plastic, USD 700K–1.5M heated multi-span and USD 1.8M–4M Venlo glass, excluding water infrastructure, permits and land.

Mild southern winters remove most heating capital; the northern climate needs heating, screens and a stronger structure to produce through winter.

About USD 8–22/m²/year for southern plastic, USD 20–50/m²/year heated multi-span and USD 42–100/m²/year Venlo glass. Energy, labour and water dominate.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Italy, enter the region (south/islands or Po Valley), winter design temperature, water source and hail/wind exposure. The climate calculator will show whether heating or ventilation carries the budget.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Slovakia-specific cost data. The ranges are copied from our Poland guide as a comparable neighbouring market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Poland bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.8M semi-closed with LED, excluding site works and land.

Only for winter supply programmes. Lighting adds significant capital and electricity cost, so many projects start with heated glass and add LED later.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Slovakia, enter the real site, winter design temperature, energy source and lighting plan. The calculator replaces the comparable Poland bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no China-specific cost data. The ranges are copied from our South Korea guide as a comparable East Asian market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable South Korea bands: roughly USD 450K–850K reinforced multi-span and USD 900K–1.7M glass or high-spec, before site works and land. Domestic equipment can bring real prices lower.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For China, enter the province's winter design temperature, typhoon or snow class, the domestic/imported equipment mix and actual energy tariffs. The calculator replaces the comparable Korea bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

É a pergunta mais pesquisada em português nestes mercados ("como montar estufa agrícola", "estufa agrícola"). O caminho: definir cultura e área, confirmar água e energia, escolher o nível tecnológico e pedir cotações a fornecedores. Com as faixas comparáveis do Brasil, uma estufa comercial em Angola custa cerca de 150–350 mil USD por hectare em túnel e 0,45–1,1 milhões USD em multi-capela, antes de custos de importação, obras e terreno — valores de planeamento, não uma cotação.

Não. A SeedMatchGroup não dispõe de dados de custo específicos de Angola. As faixas foram retiradas do nosso guia do Brasil como mercado tropical comparável e servem apenas de orientação; as propostas de fornecedores para o local concreto substituem-nas.

Com as faixas comparáveis do Brasil: cerca de 150–350 mil USD em túnel, 0,45–1,1 milhões USD em multi-capela e 1,6–3,8 milhões USD em high-tech, antes de custos de importação, obras e terreno.

Não. São faixas comparativas de planeamento. O financiador precisa de uma especificação para o local e de propostas comparáveis de fornecedores, obtidas no processo de pedido de cotação revisto por pessoas.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Para Angola, introduza o clima real, a pluviosidade, a fonte de água e a situação energética. A calculadora substitui as faixas comparáveis do Brasil por uma estimativa para o local.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

É a pergunta mais pesquisada em português nestes mercados ("como montar estufa agrícola", "estufa agrícola"). O caminho: definir cultura e área, confirmar água e energia, escolher o nível tecnológico e pedir cotações a fornecedores. Com as faixas comparáveis do Brasil, uma estufa comercial em Moçambique custa cerca de 150–350 mil USD por hectare em túnel e 0,45–1,1 milhões USD em multi-capela, antes de custos de importação, obras e terreno — valores de planeamento, não uma cotação.

Não. A SeedMatchGroup não dispõe de dados de custo específicos de Moçambique. As faixas foram retiradas do nosso guia do Brasil como mercado tropical comparável e servem apenas de orientação; as propostas de fornecedores para o local concreto substituem-nas.

Com as faixas comparáveis do Brasil: cerca de 150–350 mil USD em túnel, 0,45–1,1 milhões USD em multi-capela e 1,6–3,8 milhões USD em high-tech, antes de custos de importação, obras e terreno.

Não. São faixas comparativas de planeamento. O financiador precisa de uma especificação para o local e de propostas comparáveis de fornecedores, obtidas no processo de pedido de cotação revisto por pessoas.

Use as faixas de planejamento deste guia com a área e o nível tecnológico do projeto na calculadora. O resultado estima o orçamento; não é uma cotação de fornecedor. Para Moçambique, introduza o clima real, a pluviosidade, a fonte de água e a situação energética. A calculadora substitui as faixas comparáveis do Brasil por uma estimativa para o local.

Envie localização, cultura, área coberta, condições climáticas de projeto, análise de água, serviços e sistemas necessários num único documento. Peça a separação de equipamentos, instalação, obras do terreno, transporte, impostos, comissionamento e exclusões. Um especialista revisa o pedido antes do contato manual com fornecedores; o envio não garante propostas, disponibilidade, entrega ou financiamento.

No. SeedMatchGroup has no Bulgaria-specific cost data. The ranges are copied from our Romania guide as a comparable neighbouring market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Romania bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.5M semi-closed, excluding site works and land.

Only for twelve-month supply programmes. Continental winters make heating the largest operating cost, so many projects start with a heated polyhouse and move to glass and LED in later phases.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Bulgaria, enter the real site, winter design temperature, energy source and whether production runs through winter. The calculator replaces the comparable Romania bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no North Macedonia-specific cost data. The ranges are copied from our Romania guide as a comparable comparable Balkan market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Romania bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.5M semi-closed, excluding site works and land.

Only for twelve-month supply programmes. Continental winters make heating the largest operating cost, so many projects start with a heated polyhouse and move to glass and LED in later phases.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For North Macedonia, enter the real site, winter design temperature, energy source and whether production runs through winter. The calculator replaces the comparable Romania bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Algeria-specific cost data. The ranges are copied from our Morocco guide as a comparable neighbouring market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Morocco bands: roughly USD 180K–500K passive plastic, USD 550K–1.3M technical multi-span and USD 1.8M–4M glass or semi-closed, before water infrastructure, site works and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Algeria, enter the real climate, water source and salinity, and power situation. The calculator replaces the comparable Morocco bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Tunisia-specific cost data. The ranges are copied from our Morocco guide as a comparable neighbouring market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Morocco bands: roughly USD 180K–500K passive plastic, USD 550K–1.3M technical multi-span and USD 1.8M–4M glass or semi-closed, before water infrastructure, site works and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Tunisia, enter the real climate, water source and salinity, and power situation. The calculator replaces the comparable Morocco bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Serbia-specific cost data. The ranges are copied from our Romania guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Romania bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.5M semi-closed with LED, excluding site works and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Serbia, enter the real site, winter design temperature, energy source and lighting plan. The calculator replaces the comparable Romania bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Albania-specific cost data. The ranges are copied from our Romania guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Romania bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.5M semi-closed with LED, excluding site works and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Albania, enter the real site, winter design temperature, energy source and lighting plan. The calculator replaces the comparable Romania bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Bosnia and Herzegovina-specific cost data. The ranges are copied from our Romania guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Romania bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.5M semi-closed with LED, excluding site works and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Bosnia and Herzegovina, enter the real site, winter design temperature, energy source and lighting plan. The calculator replaces the comparable Romania bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Croatia-specific cost data. The ranges are copied from our Romania guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Romania bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.5M semi-closed with LED, excluding site works and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Croatia, enter the real site, winter design temperature, energy source and lighting plan. The calculator replaces the comparable Romania bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Estonia-specific cost data. The ranges are copied from our Poland guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Poland bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.8M semi-closed with LED, excluding site works and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Estonia, enter the real site, winter design temperature, energy source and lighting plan. The calculator replaces the comparable Poland bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Latvia-specific cost data. The ranges are copied from our Poland guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Poland bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.8M semi-closed with LED, excluding site works and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Latvia, enter the real site, winter design temperature, energy source and lighting plan. The calculator replaces the comparable Poland bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Lithuania-specific cost data. The ranges are copied from our Poland guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Poland bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.8M semi-closed with LED, excluding site works and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Lithuania, enter the real site, winter design temperature, energy source and lighting plan. The calculator replaces the comparable Poland bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Denmark-specific cost data. The ranges are copied from our Poland guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Poland bands: roughly USD 500K–1.2M heated polyhouse, USD 1.7M–3.8M Venlo glass and USD 3.4M–6.8M semi-closed with LED, excluding site works and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Denmark, enter the real site, winter design temperature, energy source and lighting plan. The calculator replaces the comparable Poland bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Nigeria-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Nigeria, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Ghana-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Ghana, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Tanzania-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Tanzania, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Senegal-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Senegal, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Uganda-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Uganda, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Côte d'Ivoire-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Côte d'Ivoire, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Cameroon-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Cameroon, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Zambia-specific cost data. The ranges are copied from the Kenya part of this guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Zambia, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Zimbabwe-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Zimbabwe, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Rwanda-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Rwanda, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Malawi-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Malawi, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Botswana-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Botswana, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Namibia-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Namibia, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Mali-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Mali, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Burkina Faso-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Burkina Faso, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Niger-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Niger, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Madagascar-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Madagascar, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Sudan-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Sudan, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.

No. SeedMatchGroup has no Somalia-specific cost data. The ranges are copied from our Kenya guide as a comparable market and are for orientation only; site-specific supplier quotations replace them.

Using the comparable Kenya bands: roughly USD 120K–300K net house or tunnel, USD 350K–900K commercial multi-span and USD 1M–2.2M export-specification, before water infrastructure, cold chain and land.

No. They are comparative planning bands. Lenders need a site-specific specification and comparable supplier offers produced through the human-reviewed RFQ process.

Use the guide's local planning bands and the calculator with your project area and technology level. A calculated budget is a planning estimate, not a supplier quote. For Somalia, enter the real climate, water source and power situation. The calculator replaces the comparable Kenya bands with a site-based estimate.

Provide the site, crop, covered area, climate design conditions, water analysis, utilities and required systems in one written brief. Ask for separate equipment, installation, site works, freight, taxes, commissioning and exclusions. A sourcing specialist reviews the RFQ before any manual supplier outreach; submission does not guarantee quotes, availability, delivery or financing.