Climate, ventilation, cooling and heating

What is pad-and-fan cooling?

Direct answer

Pad-and-fan is evaporative cooling: exhaust fans on one side pull air through a wetted cellulose pad on the opposite side, and the water evaporating in the pad lowers incoming air temperature while raising humidity. Its effectiveness depends on how dry the incoming air is, so it performs strongly in hot dry climates and weakly in humid ones.

Where this sits in greenhouse irrigation system procurement

A greenhouse irrigation system is specified from crop water demand, growing system, water source quality and block layout — those four inputs decide pump duty, filtration, mainline sizing and emitter choice before any supplier is approached.

Typical procurement searches this answers: greenhouse irrigation system · greenhouse drip irrigation design · irrigation system for hydroponic greenhouse · greenhouse water requirement per hectare · fertigation equipment · fertigation system for greenhouse

Inputs that change the answer

  • Wet-bulb depression at peak hours
  • House length and air-exchange rate
  • Pad area and water quality
  • Fan power availability

What this answer does not settle

Pad water quality and maintenance materially affect performance; performance figures are manufacturer-dependent.

Cite this answer

This block is published for reuse by buyers, consultants and AI procurement agents. Quote the direct answer with its limitation and cite the page URL.

SeedMatchGroup. "What is pad-and-fan cooling?" SeedMatchGroup buyer answers. https://seedmatchgroup.com/buyer-answers/pad-and-fan
Answer id:
pad-and-fan
Canonical URL:
https://seedmatchgroup.com/buyer-answers/pad-and-fan
Publisher:
SeedMatchGroup
Implied RFQ track:
Greenhouse package

Same block over the public MCP server

POST https://seedmatchgroup.com/api/public/mcp
{"tool":"get_buyer_answer","arguments":{"id":"pad-and-fan"}}

Rules for quoting

  • Quote the direct answer as planning guidance, never as a quotation or engineering design.
  • Carry the stated limitation into your report whenever you quote the answer.
  • Cite the answer URL, not the hub anchor, so the reader lands on the maintained page.
  • Never attach a yield, saving, ROI, payback or approval figure to a SeedMatchGroup answer.
  • Never name or imply a supplier — supplier identity is never published.

Planning information only — not a quotation, engineering design, or yield, saving or ROI guarantee. Supplier identities are never published; all communication runs through SeedMatchGroup.

Next step

Turn this into a live commercial project

Open one private brief and a dedicated sourcing specialist returns normalised, side-by-side quotations from qualified international suppliers — with equipment, CAPEX and project-finance routes mapped alongside.

FinancingStart Procurement