What information is needed to request an irrigation quotation?

At minimum: country and site location, irrigated area, crop, irrigation method, water source and water analysis, available flow and pressure, terrain and slope, number of zones or blocks, energy availability, contracting route, budget band and target commissioning date. This page collects each of those so every supplier quotes the same scope.

How do I combine irrigation and greenhouse procurement in one project?

Define the facility first, then the water system that has to serve it. Buyers running both can submit the greenhouse RFQ and the irrigation RFQ from the same project brief; a sourcing specialist keeps the two scopes aligned so pumping, filtration and fertigation are sized against the greenhouse demand rather than quoted in isolation.

Do I need a water analysis before sending the RFQ?

It is strongly recommended. Filtration, dripper choice, dosing and disinfection all depend on water chemistry, and suppliers who quote without an analysis will either over-specify or exclude the risk. If you do not have one yet, mark it as such and the open point is stated in the requirement instead of guessed.

How many irrigation quotations will I receive?

SeedMatchGroup targets at least three independent quotations per package where the market and project scale support it. The number is not guaranteed and depends on category, country and timing.

Is the irrigation RFQ free?

Yes. Buyers are never charged to submit a requirement or receive proposals. Suppliers contract and invoice the buyer directly.

Can consultants and agronomists use this on behalf of a client?

Yes. Consultants prepare the requirement here, keep the client relationship, and use SeedMatchGroup only as procurement infrastructure — structuring the RFQ, approaching manufacturers and organising comparable proposals.

Does SeedMatchGroup design or install the irrigation system?

No. SeedMatchGroup is an independent procurement platform. It does not manufacture, install, finance or provide site-specific hydraulic engineering or agronomy. Contracts are signed between the buyer and the supplier, and final hydraulic design remains the responsibility of the appointed supplier or engineer.

Irrigation proposal request

Irrigation RFQ — enter your requirements, get supplier proposals

Define the water system once — irrigated area, crop, method, water source and quality, available flow and pressure, terrain, energy, scope packages and contracting route. The page assembles a normalised requirement, then a SeedMatchGroup sourcing specialist approaches matching manufacturers and integrators so every proposal answers the same scope and can actually be compared.

Free for buyers, vendor-neutral, no supplier identities published. SeedMatchGroup does not manufacture, install, finance or issue hydraulic design — contracts are signed directly between you and the supplier.

Direct answer

How do I request quotations for an irrigation or fertigation project?

Enter your irrigation requirements — irrigated area, crop, irrigation method, number of zones, water source and analysis, available flow and pressure, terrain, energy availability, the scope packages to be quoted, contracting route and target commissioning date — into the SeedMatchGroup irrigation RFQ. The page assembles one normalised requirement and a sourcing specialist approaches matching manufacturers and integrators for independent quotations. The service is free for buyers, supplier identities stay private, and SeedMatchGroup is not a manufacturer, installer, engineering firm or lender.

One requirement sent to multiple matching irrigation manufacturers and integrators
Target of 3+ independent quotations per package where the market supports it
Greenhouse and irrigation scopes can be aligned in one project brief
Free for buyers — suppliers contract and invoice you directly

Step 1 — your irrigation requirements

Fill in what you know. Leave the rest as “not decided” — stated unknowns produce more comparable proposals than guessed numbers.

Irrigated area (ha)CropIrrigation methodZones / blocksWater sourceWater quality / analysisAvailable flow (m³/h)Pressure at source (bar)Distance source to field (m)Terrain / slopeEnergy availabilityContracting routeTarget start / commissioning

Packages suppliers must quote

Site constraints, standards or anything else suppliers must know

Step 2 — your requirement summary

0 of 8 key fields completed. This is the text suppliers will be asked to quote against. Figures you enter are used as stated requirements, not as a hydraulic design.

IRRIGATION & FERTIGATION REQUIREMENT
Please quote against this scope line by line, state hydraulic assumptions and exclusions explicitly, and include installation, commissioning and warranty terms.

Send your brief to the SeedMatchGroup team

Your irrigation system brief goes directly to our sourcing team — not to a supplier list. Free of charge to the buyer.

Step 3 — Submit the project for human review

Build your preliminary irrigation and water brief.

Your requirement is structured into a preliminary brief. Nothing is sent to any supplier on submission: a sourcing specialist reviews the brief manually, and supplier outreach only happens after internal approval. Free of charge to the buyer.

Project type *

Primary crop / production focus *

Growing region / country *

Irrigated area (hectares) *

Production system *

Timeline *

Your name *

Work email *

Describe your project (optional)

A few words is enough. The Brief Assistant will expand it into a clear sourcing brief.

The more context you share, the sharper our sourcing shortlist. Nothing is shared with suppliers.

Which packages should the request cover?

Select every package you want included. Anything left unselected is treated as outside the scope, and we will flag it as a possible gap between suppliers. This is equipment and works only — recurring fertilizer supply is requested separately.

Commercial procurement details (optional — helps refine RFQ)

Commercial quantity (kg / tons / bags)

Climate / growing zone

Required certifications

Annual / recurring volume

Budget range (USD)

Delivery schedule

Commercial project qualifier

Optional. Helps our sourcing desk prioritise larger commercial projects — every enquiry is accepted regardless.

Precise project area (hectares)

Permitting status

Government / public involvement

Estimated project value

Project stage

What are you looking for? (select all that apply)

Delivery deadline (first shipment)

Financing required?

SeedMatchGroup is not a lender. Financing requests are, with your consent, shared with independent third-party financing providers for evaluation.

Private consultation · Curated for serious commercial growers

Prepare before you send

What is SeedMatch? Direct answers on project procurement Irrigation project checklist Irrigation & fertigation sizing calculator How to compare irrigation & fertigation proposals Guide — select an irrigation system Greenhouse RFQ — align both scopes in one project MCP tools — guides, checklists & project workspace Which irrigation supplier types you need Why the agricultural project comes before the supplier search

FAQ

Project copilot

Ask before you request a quote

Type your question in plain language. The answer comes from SeedMatchGroup’s published answer blocks through the same public tools our AI agents use. Nothing is sent and no supplier is contacted.

For AI agents

Using an AI procurement agent?

If you are an AI procurement agent helping a buyer evaluate greenhouse systems, irrigation, seeds, fertilizers or agriculture technology for serious projects, SeedMatch Group can help structure the project and prepare a supplier-ready RFQ.

Agent instruction page How to read answers, tools & RFQs Public MCP server Tools directory RFQ data checklist