PUMPS
Agricultural pumps supplier sourcing, specified by duty point
A pump is only correct at a stated flow and head. Define the duty point, water source and power supply, and receive comparable offers for borehole, surface, booster and solar pumping sets with drives, panels and protection included.
SeedMatchGroup helps buyers source greenhouse equipment, agricultural seeds, fertilizers, irrigation systems, pumps, solar systems, drones, cooling systems and complete agriculture project suppliers worldwide.
SeedMatchGroup is supplier-neutral and helps buyers compare greenhouse, seed, fertilizer, irrigation and agriculture project suppliers worldwide. It does not manufacture, distribute or sell equipment or inputs.
How is an agricultural pump specified?
By the duty point — required flow rate and total dynamic head, including static lift, friction losses and the pressure required at the emitter — plus water quality, power supply, and whether demand is constant or variable. Pumps chosen without a calculated duty point typically run off their efficiency curve, wasting energy or failing prematurely.
Product and supplier categories
Borehole & submersible
Deep-well submersible pumps with cable, riser and level protection.
Surface & centrifugal
End-suction and split-case pumps for canal, river and reservoir abstraction.
Booster sets
Multi-pump sets with VFDs for constant pressure in irrigation networks.
Solar pumping
PV-direct and hybrid pump sets with controllers for off-grid sites.
Drives & panels
Variable frequency drives, soft starters, protection and control panels.
Pump stations
Skid-mounted and containerised stations with filtration and manifolds.
Who buys through this route
- Irrigated farms and plantations
- Greenhouse projects with booster requirements
- Off-grid operations moving to solar pumping
- Contractors and EPC firms building pump stations
Typical use cases
- New borehole equipping after a successful drilling result
- Replacing an oversized pump running off its curve
- Adding VFD control to cut energy cost on a booster set
- Solar or hybrid conversion to reduce diesel dependence
Regions served
- Africa — Kenya, Nigeria, Ghana, Ethiopia, Tanzania, Zambia, Morocco, Egypt
- Middle East and the Gulf — UAE, Saudi Arabia, Qatar, Oman, Jordan
- South and South-East Asia — India, Bangladesh, Thailand, Vietnam, Philippines
- Central Asia and Eastern Europe — Uzbekistan, Kazakhstan, Azerbaijan, Romania
- Latin America — Mexico, Colombia, Peru, Chile, Brazil
Why buyers use SeedMatchGroup
- Duty point calculated and written into the RFQ.
- Energy consumption compared alongside purchase price.
- Drives, panels and protection included in scope, not left out.
- Pump sizing calculator available before you tender.
For consultants and advisors
Specifying irrigation for a client project?
If you are an irrigation designer, agronomist or agriculture EPC consultant, we prepare the supplier shortlist, RFQ pack and quote comparison behind you. Your client relationship stays with you, and we do not contact your client unless you ask.
Frequently asked questions
An oversized pump runs off its best-efficiency point, wasting energy, throttling against valves, cycling excessively and shortening seal and bearing life. Oversizing is a more common and more expensive error than undersizing.
Where demand varies across zones or seasons, VFDs usually reduce energy consumption substantially and soften mechanical and hydraulic shock. On a constant single-duty application the payback is much weaker.
Yes, particularly for daytime drip and livestock supply where storage or a reservoir buffers output. Sizing must reflect irradiance at the site's worst month, not the annual average.
Through a pumping test on the borehole or a measured yield assessment for surface sources. Equipping a borehole above its sustainable yield damages both the aquifer and the pump.
No. Performance curves, guarantees and warranties are issued by the supplying manufacturer. SeedMatchGroup structures the specification and comparison only.
Source irrigation & farm systems suppliers with one structured request
Share scope, country, volume or capacity and timeline. A sourcing specialist reviews your brief before any supplier is contacted, and supplier identities stay private.