Drip Irrigation & Fertigation in Spain — Riego por goteo y fertirrigación
In Almería, Murcia, Granada and Huelva, greenhouse growers plan riego por goteo and fertirrigación around aquifer, desalinated or reclaimed water, salinity and the irrigation community allocation.
Can I mix desalinated and well water?
Yes, many systems blend sources to manage salinity. Put both water analyses and the planned blend in the brief so the fertigation head and filtration are sized correctly. The FAO figures are Spain's 2024 national averages across open field and greenhouse. The yield planner uses single greenhouse studies in Almería and Murcia: tomato 16.5 kg/m² per season against a national 8.2 kg/m², pepper 8.8–11.37 against 6.5, and cucumber 7.97–11.54, which brackets the national 8.8. Neither is a promise for your site.
New to drip? Read the guide: what is drip irrigation — components, water and fertilizer efficiency benchmarks, and maintenance.
Typical design envelope
Reference parameters used to open the RFQ. Final values are sized by our engineers against source-water, soil and crop stage.
System components
Pressure-compensated lines for soil beds, or stakes for substrate, set by crop and row layout.
Dosing channels, mixing and EC/pH sensors, matched to the number of irrigation valves.
Selected from your water analysis — disc, screen or sand media.
Pump sized to the largest valve flow, with storage for peak days.
Scheduling by timer or radiation, with drain measurement on substrate.
Why drip for tomato, cucumber and pepper in Spain
- Water and nutrients go to each plant, which suits tomato, cucumber and pepper.
- One request can cover driplines, fertigation, filtration, pumping and controls.
- Offers are compared on the same scope; the specification is supplier-neutral.
Published figures for tomato, cucumber and pepper in Spain
Results from named studies, not SeedMatchGroup estimates or guarantees. Yields and water use vary with country, climate, variety, greenhouse technology and management. Compare national yields across countries.
| Figure | Published result | Source |
|---|---|---|
| Tomato national yield | 82.4 t/ha (8.2 kg/m²) national average, 2024 — open field and greenhouse combined, not a greenhouse benchmark | FAOSTAT Crops and livestock products, 2024 |
| Cucumber national yield | 87.9 t/ha (8.8 kg/m²) national average, 2024 — open field and greenhouse combined, not a greenhouse benchmark | FAOSTAT Crops and livestock products, 2024 |
| Pepper national yield | 64.6 t/ha (6.5 kg/m²) national average, 2024 — open field and greenhouse combined, not a greenhouse benchmark | FAOSTAT Crops and livestock products, 2024 |
| Water use efficiency | Drip used water 250% (tomato), 274% (cucumber) and 245% (pepper) more efficiently than furrow, with yields 2–3% lower under drip | Pakistan plastic-tunnel trial, SAARC J. Agri. 2014 |
| System price | No published commercial-scale price found. Prices come from supplier offers on the reviewed brief. | Not available |
Tomato, cucumber and pepper drip and fertigation calculator
Enter your own block layout and your agronomist's water and nutrient targets. The starting values are example inputs to replace, not recommendations. Results are planning estimates, not an engineering design or a supplier quotation.
Drip irrigation
Fertigation (nitrogen)
Turn this estimate into a project brief
Send these figures to the fertigation equipment RFQ. Your inputs and results are attached to the private brief for specialist review before supplier outreach.
Buying more than once? Save these project details to your buyer profile so your site, crop, budget and timeline are pre-filled on every future request.
Indicative only. Not financial advice, not agronomic advice, not engineering design. Final numbers require supplier, agronomist, engineer and local regulatory review.
Buyer path
From your site to one drip and fertigation request
- 1 · Define
Crop and site details
State the region and site, crop and growing system (soil or substrate), water source with a recent analysis, storage, power supply and the area to be irrigated.
- 2 · Calculate
Size the critical systems
Use the focused tools below. Results are planning estimates, not engineering designs or supplier quotations.
- 3 · Request
Create one reviewed brief
Add the figures to a private project request. A sourcing specialist reviews it before any relevant supplier is approached.
Recommended calculators
For commercial projects from USD 250K. Supplier participation and response timing depend on scope, country, availability and brief completeness; neither is guaranteed.
FAQ
Ready to source a tomato, cucumber and pepper drip system in Spain?
A dedicated sourcing specialist opens your RFQ to qualified global manufacturers — driplines, fertigation, filtration, pumps and controls — and returns side-by-side offers.