Drip solution · Tomato, cucumber and pepper · Canada

Drip Irrigation & Fertigation in Canada — Tomato, Cucumber, Pepper

Canadian greenhouse vegetable growers — many in Ontario, British Columbia and Quebec — mostly grow on substrate with drip stakes, recirculating drain water and winter heating. Buyers focus on drain-water reuse, disinfection, nutrient discharge rules and winter energy.

Direct answer

Do I have to recirculate drain water?

Nutrient discharge is regulated at provincial level. Ask the regulator what applies to your site; recirculation and disinfection can be included in the RFQ. Yes, if pumps, tanks and pipes sit in heated space. State the heating plan in the brief.

New to drip? Read the guide: what is drip irrigation — components, water and fertilizer efficiency benchmarks, and maintenance.

Greenhouse vegetable rows with drip irrigation lines

Typical design envelope

Reference parameters used to open the RFQ. Final values are sized by our engineers against source-water, soil and crop stage.

Typical scope
Drip stakes to rockwool or coco slabs in heated glass greenhouses
Fertigation
Multi-channel dosing with EC/pH control and drain measurement
Drain water
Collection, disinfection and reuse — check provincial discharge rules
Season
Heated year-round production; irrigation follows radiation

System components

Driplines or drip stakes

Pressure-compensated lines for soil beds, or stakes for substrate, set by crop and row layout.

Fertigation head

Dosing channels, mixing and EC/pH sensors, matched to the number of irrigation valves.

Filtration

Selected from your water analysis — disc, screen or sand media.

Pumping and storage

Pump sized to the largest valve flow, with storage for peak days and power cuts.

Controller

Scheduling by timer or radiation, with drain measurement on substrate.

Why drip for tomato, cucumber and pepper in Canada

  • Water and nutrients go to each plant, which suits tomato, cucumber and pepper.
  • One request can cover driplines, fertigation, filtration, pumping and controls.
  • Offers are compared on the same scope; the specification is supplier-neutral.

Published figures for tomato, cucumber and pepper in Canada

Results from named studies, not SeedMatchGroup estimates or guarantees. Yields and water use vary with country, climate, variety, greenhouse technology and management. Compare national yields across countries.

FigurePublished resultSource
Tomato national yield89.1 t/ha (8.9 kg/m²) national average, 2024 — open field and greenhouse combined, not a greenhouse benchmarkFAOSTAT Crops and livestock products, 2024
Cucumber national yield26.3 t/ha (2.6 kg/m²) national average, 2024 — open field and greenhouse combined, not a greenhouse benchmarkFAOSTAT Crops and livestock products, 2024
Pepper national yield28.4 t/ha (2.8 kg/m²) national average, 2024 — open field and greenhouse combined, not a greenhouse benchmarkFAOSTAT Crops and livestock products, 2024
Water use efficiencyDrip used water 250% (tomato), 274% (cucumber) and 245% (pepper) more efficiently than furrow, with yields 2–3% lower under dripPakistan plastic-tunnel trial, SAARC J. Agri. 2014
System priceNo published commercial-scale price found. Prices come from supplier offers on the reviewed brief.Not available

Tomato, cucumber and pepper drip and fertigation calculator

Enter your own block layout and your agronomist's water and nutrient targets. The starting values are example inputs to replace, not recommendations. Results are planning estimates, not an engineering design or a supplier quotation.

Drip irrigation

Emitters
41,667
Flow, all emitters open
66.7 m³/h
Peak daily water
100.0 m³
Irrigation zones needed
2
Pump hours per peak day
2.0 h
Production at your yield
—

Fertigation (nitrogen)

Nitrogen per peak day
20.0 kg
Fertilizer per peak day
129.0 kg
Stock solution injected
1,000 L/day
Stock tank strength
12.9 kg / 100 L

Turn this estimate into a project brief

Send these figures to the fertigation equipment RFQ. Your inputs and results are attached to the private brief for specialist review before supplier outreach.

Buying more than once? Save these project details to your buyer profile so your site, crop, budget and timeline are pre-filled on every future request.

Indicative only. Not financial advice, not agronomic advice, not engineering design. Final numbers require supplier, agronomist, engineer and local regulatory review.

Buyer path

From water and crop details to an irrigation request

  1. 1 · Define

    Crop and site details

    Define the crop, country, area, water source and analysis, available flow, pressure and operating window.

  2. 2 · Calculate

    Size the critical systems

    Use the focused tools below. Results are planning estimates, not engineering designs or supplier quotations.

  3. 3 · Request

    Create one reviewed brief

    Add the figures to a private project request. A sourcing specialist reviews it before any relevant supplier is approached.

For commercial projects from USD 250K. Supplier participation and response timing depend on scope, country, availability and brief completeness; neither is guaranteed.

FAQ

Ready to source a tomato, cucumber and pepper drip system in Canada?

A dedicated sourcing specialist opens your RFQ to qualified global manufacturers — driplines, fertigation, filtration, pumps and controls — and returns side-by-side offers.

Next step

Turn this into a live commercial project

Open one private brief and a dedicated sourcing specialist returns normalised, side-by-side quotations from qualified international suppliers — with equipment, CAPEX and project-finance routes mapped alongside.