Greenhouse Automation Upgrade Planner.
Compare your current control level against a target automation tier — climate computer, sensors, screens, irrigation automation or labour robotics — for an indicative CAPEX band, annual saving and payback.
Greenhouse Automation Upgrade Planner
Compare your current control level against a target automation tier — climate computer, sensors, screens, irrigation automation or labour robotics — for an indicative CAPEX band, annual saving and payback.
Estimate only — not a quotation. Outputs are indicative planning ranges based on the values you enter and typical commercial benchmarks. Real pricing, specifications and lead times vary by country, site conditions and supplier, and are confirmed only in written offers collected through a private RFQ.
Current state & target
Indicative only. Not financial advice. Not agronomic advice. Not engineering design. Final numbers require supplier, agronomist, engineer and local regulatory review.
Turn this estimate into a project brief
Send these figures to the greenhouse RFQ form. Your inputs and results are attached to the brief, a sourcing specialist reviews it, and only then are suitable suppliers or project partners approached.
Buying more than once? Save these project details to your buyer profile so your site, crop, budget and timeline are pre-filled on every future request.
Indicative only. Not financial advice, not agronomic advice, not engineering design. Final numbers require supplier, agronomist, engineer and local regulatory review.
Turn this estimate into a qualified project
SeedMatchGroup is a supplier-neutral, human-led platform. We do not manufacture or resell equipment — we help buyers specify the project, review relevant suppliers privately and compare the written offers received. Supplier participation and timing are not guaranteed.
Send these numbers to the RFQ Builder
The numbers below were calculated with SeedMatchGroup's Greenhouse Automation Upgrade Planner. Indicative — the specialist will confirm scope before contacting suppliers.
11 inputs · assumptions · results
Who this is for and how sourcing works
This page serves commercial buyers scoping greenhouse automation upgrades. SeedMatchGroup works on serious commercial projects from roughly USD 250,000 upwards — professional growers, project developers, agribusinesses, EPC firms, investors and government programmes. It is not a retail channel for home gardens, hobby greenhouses or small seed packets.
Best for
- Existing operations weighing a control-system upgrade
- New projects deciding how much automation the business case supports
- Operators comparing sensor, screen and irrigation automation packages
Typical project types
- Retrofit of climate computer, sensors and irrigation automation onto an existing structure
- Addition of energy/shade screens and automated ventilation
- Introduction of labour-saving handling or transport equipment
What affects project cost
- Size of the automation-tier gap being closed
- Existing wiring, plumbing and control infrastructure
- Brand ecosystem and integration complexity
- Site access and downtime constraints during installation
RFQ checklist
- Area and current control level
- Target automation tier
- Current labour and energy cost
- Timeline and budget band
Supplier matching process
- Submit one private brief — project type, country, area or capacity, crop or use case, stage, budget band and timeline.
- A sourcing specialist reviews the brief and structures it into a comparable RFQ specification.
- Qualified independent suppliers and engineering partners are approached privately against that one specification.
- You receive a like-for-like comparison. Supplier identities stay private until you decide to proceed.
Buyer is not charged
Buyers are not charged to submit a brief, receive a supplier comparison or use the planning tools.
SeedMatchGroup helps buyers compare suppliers and request quotes. SeedMatchGroup is an intermediary: it does not manufacture equipment, produce seed, build projects or provide financing directly. Pricing, specification, warranty and delivery remain the responsibility of the selected independent supplier.
Frequently asked questions
It is the per-m2 gap between your current control level and your target level, applied as an indicative benchmark range. Real cost depends on greenhouse size, existing wiring/plumbing, brand ecosystem and site access, and must be confirmed by climate-control integrators.
As indicative percentage reductions in current labour and energy cost associated with the automation gap being closed — sensors and irrigation automation typically save labour, while screens, climate computers and better setpoint control typically save energy. These are planning percentages, not measured results.
No. Payback depends heavily on current labour and energy cost, crop value and how far below best practice the current operation runs. Low-labour-cost, low-energy-cost sites often see materially longer paybacks than the reverse.
Mechanised or semi-automated handling, spraying, harvesting-support or internal transport equipment. It is the highest automation tier and usually only economic at scale or where labour is scarce or expensive.
Turning this estimate into a request? The greenhouse systems request builder lists what changes a quote — structure, cover, climate and installation scope — and opens a pre-filled request that our team reviews before any supplier is contacted.
Understanding the values
What each choice in this calculator means, and how the options differ in practice.
- Area and layout
- Hectares alone are not a specification. Block dimensions, corridors and packhouse share decide how much of the site actually produces.
- Scenario testing
- Change one assumption at a time and record the effect. The value of the tool is comparing scenarios, not the single first number.
Illustrative project summary
1 ha multi-span tomato house
A new commercial entrant builds a first multi-span block with fertigation, insect screens and a basic climate computer.
1 ha · Multi-span polyhouse · Tomatoes
Indicative full greenhouse project CAPEX
USD 575K – USD 1.56M
Illustration only, not a real project or quotation. This is the structure, equipment and site-works budget for the example greenhouse, not the price of this calculator’s individual system, seeds or inputs, and not a result calculated from your entries. Excludes land, permits, packhouse, financing costs and working capital.
Based on the published commercial greenhouse cost benchmark. Written offers require a private project review; commercial projects start from USD 250K.
What can change the result?
This is a preliminary planning estimate based on the values you entered. The variables below usually move the outcome most, and should be confirmed with an agronomist, engineer and supplier offers before final design.
- Crop and cultivar — water, climate and support requirements differ per crop
- Growing area and layout — hectares alone are not a greenhouse specification
- Local climate: temperature, humidity, radiation and wind exposure
- Growing system (soil, substrate, hydroponic) and plant density
Questions this calculator answers
Typical buyer and investor searches this tool is built for, including the markets where we run the most commercial projects.
- commercial greenhouse construction cost per hectare for a commercial project
- commercial greenhouse construction cost for a 2-hectare project — India
- commercial greenhouse construction cost: indicative planning ranges — Kenya
- commercial greenhouse construction cost benchmarks for investors — Saudi Arabia
- commercial greenhouse construction cost under local market conditions — Mexico
- commercial greenhouse construction cost — what to specify in a supplier RFQ
Method and decision path
How to use this result in a commercial project
Use the result to test scope and compare scenarios. It is not a design, agronomic prescription, financing offer or supplier quotation.
1. Enter site evidence
Replace defaults with measured area, climate, water, energy, crop and commercial assumptions.
2. Test scenarios
Change one assumption at a time and record the effect on capacity, cost, demand or return.
3. Validate the duty
Ask the relevant agronomist, engineer or financial adviser to check the inputs and constraints.
4. Prepare a private RFQ
Carry the confirmed scope into a human-reviewed brief so written offers can be compared on the same basis.
Final specifications, performance, prices, supplier participation and timing depend on the site and written supplier responses; none is guaranteed by this calculator.
Tell us five things and we route your brief
These fields decide which specialist and which suppliers see your request. Nothing is submitted here — your answers are carried into the private RFQ.
The USD 250K project threshold applies to capital projects. Recurring fertilizer programmes are reviewed by shipment size, annual volume and sourcing fit.
A sourcing specialist shortlists reviewed providers for your scope and returns comparable offers. Supplier details stay with us — all communication runs through SeedMatchGroup.
Estimate only: these figures are indicative planning numbers, not a quotation. Final pricing, specifications and lead times come from supplier offers after your brief is reviewed.
Plan the project around the numbers
A calculator output is a starting point. Pair it with the planning guides below to align timeline, irrigation, budget and risk before you launch an RFQ.
One private brief, specialist review, private supplier research and a like-for-like comparison.
Spec gaps, MOQ, delivery, Incoterms and evidence labels for seeds, greenhouses, irrigation, fertilizers and produce.
Month-by-month schedule from concept to first harvest across 9 stages.
Design principles for drip, pivot, fertigation and filtration on commercial projects.
How CAPEX, working capital and operating cost drive the project business case.
The ten most expensive planning and procurement pitfalls — and how to avoid them.
Procurement answers behind these numbers
A model output only holds if the scope, contract route and delivery terms match the assumptions. These reference answers cover the commercial decisions that move the figure.
- Turnkey EPC vs separate equipment packages
- What belongs in a greenhouse equipment specification
- Normal payment milestones in equipment contracts
- Which Incoterms to use for greenhouse and irrigation equipment
- How long a commercial greenhouse takes from order to handover
- What is normally the owner's scope on a greenhouse project
Move greenhouse automation & controls into a structured RFQ
Editorial · not a sales pitchCalculator outputs are indicative. When your numbers stabilise, a supplier-neutral RFQ turns those estimates into a consistent brief for comparing the written offers that participating suppliers provide.
The facts a complete, supplier-neutral request on this topic includes. Use it as a checklist before submitting.
- Covered area (m² or ha), bay/gutter layout preference and target gutter height
- Site location, altitude and design loads (wind, snow, seismic) if known
- Crop and production system (soil, substrate, hydroponic, nursery)
- Covering choice: polyethylene film, polycarbonate or glass — and expected lifetime
- Climate scope: ventilation, screens, heating, cooling/pad-fan, CO₂, controls
- Irrigation/fertigation scope and water source quality
- Target commissioning date, phasing and budget band (USD $250K+)
- Incoterms, destination port/site and who handles civil works and erection
- Site plan or coordinates with plot dimensions
- Soil/water analysis where available
- Any existing concept drawing, BOQ or previous supplier offer
Opens the RFQ Builder pre-scoped as a greenhouse project so suppliers quote structure, covering, climate and irrigation on the same basis. You stay in control — nothing is submitted until you review and confirm.
Free to submit · supplier-neutral · reviewed by a specialist before any supplier is contacted.
Running these numbers for a client project?
Agronomists, greenhouse and irrigation consultants use this calculator for feasibility, then hand the project to us for supplier shortlisting, RFQ preparation and quote comparison. You stay client-facing and we work through you.
Your client relationship stays with you — we work through you and never contact your client unless you ask.
Indicative only
- This tool is indicative only.
- It is not financial advice.
- It is not agronomic advice.
- It is not engineering design.
- Final numbers require supplier, agronomist, engineer and local regulatory review.
SeedMatch Group is an independent agricultural project sourcing and RFQ platform. We are not a farm, seed producer, fertilizer manufacturer, irrigation manufacturer, greenhouse builder, EPC contractor, lender or financial advisor. Supplier and project partner outreach is handled only after a commercial project brief is reviewed.
Supplier and manufacturer content is provided for research, transparency and discovery only. Buyers submit one project or RFQ to SeedMatch Group; our team validates and organises it, manages any suitable supplier or manufacturer outreach, and presents the responses through SeedMatch. There is no public directory of company identities, automatic matching, direct messaging or direct buyer-supplier contact.