Türkiye greenhouse price calculator
Estimate a commercial greenhouse budget in Türkiye using the cost bands from our Türkiye greenhouse cost guide. Planning estimate only, not a quote.
Türkiye greenhouse price calculator
Estimate a commercial greenhouse budget in Türkiye using the cost bands from our Türkiye greenhouse cost guide. Planning estimate only, not a quote.
Estimate only — not a quotation. Outputs are indicative planning ranges based on the values you enter and typical commercial benchmarks. Real pricing, specifications and lead times vary by country, site conditions and supplier, and are confirmed only in written offers collected through a private RFQ.
1 ha = 10,000 m²; 1 dekar = 1,000 m². Current entry: 10 dekar.
The three bands from the Türkiye cost guide.
Locally fabricated frame, film cladding, ventilation, drip and fertigation. The dominant commercial format on the Mediterranean coast.
Add 12–25% over the hardware bands for levelling, foundations, drainage, water storage, the power connection and, where used, the geothermal well and heat-exchange plant. Land, packhouse and cold storage are separate.
Enter the dated rate from your bank or quote. We do not publish exchange rates.
What moves the price in Türkiye
Local manufacturing
Structures, films, fans and irrigation are produced domestically, so the hardware cost is materially lower than imported equivalents — but the quality band is wide and must be pinned down in writing.
Geothermal availability
In regions with geothermal resource, heating shifts from the largest operating cost to a modest one, which changes the technology level a project can justify.
Inland winter
Anatolian plateau sites face real winter heating demand and snow load, closer to a continental budget than to the coastal one.
Currency and import content
Climate computers, screens, LED and specialist hydroponic components are usually imported and priced in hard currency, so the import share of the budget should be separated from the local share.
Export compliance
Projects supplying EU retail carry residue, traceability and packhouse requirements that sit outside the greenhouse package but inside the project budget.
Frequently asked questions
From the Türkiye greenhouse cost guide: USD 25–65/m² for a locally fabricated plastic multi-span, USD 65–140/m² for a heated mid-tech house and USD 200–450/m² for Venlo glass. They are planning ranges, not quotes.
Levelling, foundations, drainage, water storage, the power connection and, where used, the geothermal well and heat-exchange plant typically add 12–25% over the hardware bands. Land, packhouse and cold storage stay separate.
Turkish growers commonly measure land in dekar; one dekar is 1,000 m². The calculator shows the area in both m² and dekar.
Yes, if you enter the dated USD/TRY rate from your bank or quote. We do not publish exchange rates.
No. We help the buyer specify the project and run a private, staff-reviewed request with qualified suppliers. It is free for buyers; capital projects start at USD 250,000.
Türkiye project request
Turn this estimate into a private request
Your request carries the area, structure and calculated budget. Signed in, you see it in your buyer dashboard. Free for buyers; no supplier is contacted before staff review.
Planning estimate, not a quote or offer. Free for buyers; capital projects start at USD 250,000. SeedMatchGroup does not manufacture, sell, build or finance greenhouses.
Turn this estimate into a qualified project
SeedMatchGroup is a supplier-neutral, human-led platform. We do not manufacture or resell equipment — we help buyers specify the project, review relevant suppliers privately and compare the written offers received. Supplier participation and timing are not guaranteed.
Turning this estimate into a request? The greenhouse systems request builder lists what changes a quote — structure, cover, climate and installation scope — and opens a pre-filled request that our team reviews before any supplier is contacted.
Understanding the values
What each choice in this calculator means, and how the options differ in practice.
- Area and layout
- Hectares alone are not a specification. Block dimensions, corridors and packhouse share decide how much of the site actually produces.
- Scenario testing
- Change one assumption at a time and record the effect. The value of the tool is comparing scenarios, not the single first number.
Illustrative project summary
2 ha polytunnel expansion
An established open-field grower adds protected cropping with natural ventilation and drip irrigation.
2 ha · Single-span polytunnel · Leafy greens and herbs
Indicative full greenhouse project CAPEX
USD 575K – USD 1.3M
Illustration only, not a real project or quotation. This is the structure, equipment and site-works budget for the example greenhouse, not the price of this calculator’s individual system, seeds or inputs, and not a result calculated from your entries. Excludes land, permits, packhouse, financing costs and working capital.
Based on the published commercial greenhouse cost benchmark. Written offers require a private project review; commercial projects start from USD 250K.
What can change the result?
This is a preliminary planning estimate based on the values you entered. The variables below usually move the outcome most, and should be confirmed with an agronomist, engineer and supplier offers before final design.
- Crop and cultivar — water, climate and support requirements differ per crop
- Growing area and layout — hectares alone are not a greenhouse specification
- Local climate: temperature, humidity, radiation and wind exposure
- Growing system (soil, substrate, hydroponic) and plant density
Questions this calculator answers
Typical buyer and investor searches this tool is built for, including the markets where we run the most commercial projects.
- seed rate and seed requirement planning per hectare for a commercial project
- seed rate and seed requirement planning for a 2-hectare project — India
- seed rate and seed requirement planning: indicative planning ranges — Kenya
- seed rate and seed requirement planning benchmarks for investors — Saudi Arabia
- seed rate and seed requirement planning under local market conditions — Mexico
- seed rate and seed requirement planning — what to specify in a supplier RFQ
Method and decision path
How to use this result in a commercial project
Use the result to test scope and compare scenarios. It is not a design, agronomic prescription, financing offer or supplier quotation.
1. Enter site evidence
Replace defaults with measured area, climate, water, energy, crop and commercial assumptions.
2. Test scenarios
Change one assumption at a time and record the effect on capacity, cost, demand or return.
3. Validate the duty
Ask the relevant agronomist, engineer or financial adviser to check the inputs and constraints.
4. Prepare a private RFQ
Carry the confirmed scope into a human-reviewed brief so written offers can be compared on the same basis.
Final specifications, performance, prices, supplier participation and timing depend on the site and written supplier responses; none is guaranteed by this calculator.
Plan the project around the numbers
A calculator output is a starting point. Pair it with the planning guides below to align timeline, irrigation, budget and risk before you launch an RFQ.
One private brief, specialist review, private supplier research and a like-for-like comparison.
Spec gaps, MOQ, delivery, Incoterms and evidence labels for seeds, greenhouses, irrigation, fertilizers and produce.
Month-by-month schedule from concept to first harvest across 9 stages.
Design principles for drip, pivot, fertigation and filtration on commercial projects.
How CAPEX, working capital and operating cost drive the project business case.
The ten most expensive planning and procurement pitfalls — and how to avoid them.
Procurement answers behind these numbers
A model output only holds if the scope, contract route and delivery terms match the assumptions. These reference answers cover the commercial decisions that move the figure.
- Turnkey EPC vs separate equipment packages
- What belongs in a greenhouse equipment specification
- Normal payment milestones in equipment contracts
- Which Incoterms to use for greenhouse and irrigation equipment
- How long a commercial greenhouse takes from order to handover
- What is normally the owner's scope on a greenhouse project
Move türkiye greenhouse price calculator into a structured RFQ
Editorial · not a sales pitchCalculator outputs are indicative. When your numbers stabilise, a supplier-neutral RFQ turns those estimates into a consistent brief for comparing the written offers that participating suppliers provide.
The facts a complete, supplier-neutral request on this topic includes. Use it as a checklist before submitting.
- Covered area (m² or ha), bay/gutter layout preference and target gutter height
- Site location, altitude and design loads (wind, snow, seismic) if known
- Crop and production system (soil, substrate, hydroponic, nursery)
- Covering choice: polyethylene film, polycarbonate or glass — and expected lifetime
- Climate scope: ventilation, screens, heating, cooling/pad-fan, CO₂, controls
- Irrigation/fertigation scope and water source quality
- Target commissioning date, phasing and budget band (USD $250K+)
- Incoterms, destination port/site and who handles civil works and erection
- Site plan or coordinates with plot dimensions
- Soil/water analysis where available
- Any existing concept drawing, BOQ or previous supplier offer
Opens the RFQ Builder pre-scoped as a greenhouse project so suppliers quote structure, covering, climate and irrigation on the same basis. You stay in control — nothing is submitted until you review and confirm.
Free to submit · supplier-neutral · reviewed by a specialist before any supplier is contacted.
Running these numbers for a client project?
Agronomists, greenhouse and irrigation consultants use this calculator for feasibility, then hand the project to us for supplier shortlisting, RFQ preparation and quote comparison. You stay client-facing and we work through you.
Your client relationship stays with you — we work through you and never contact your client unless you ask.
Indicative only
- This tool is indicative only.
- It is not financial advice.
- It is not agronomic advice.
- It is not engineering design.
- Final numbers require supplier, agronomist, engineer and local regulatory review.
SeedMatch Group is an independent agricultural project sourcing and RFQ platform. We are not a farm, seed producer, fertilizer manufacturer, irrigation manufacturer, greenhouse builder, EPC contractor, lender or financial advisor. Supplier and project partner outreach is handled only after a commercial project brief is reviewed.
Supplier and manufacturer content is provided for research, transparency and discovery only. Buyers submit one project or RFQ to SeedMatch Group; our team validates and organises it, manages any suitable supplier or manufacturer outreach, and presents the responses through SeedMatch. There is no public directory of company identities, automatic matching, direct messaging or direct buyer-supplier contact.