Master planner · Greenhouse projects

Plan My Commercial Greenhouse.

One climate-aware planning tool for commercial greenhouse projects from 1 hectare upward. Model water, cooling and heating, energy, CAPEX, OPEX, yield and ROI across 15 priority markets — Saudi Arabia, UAE, Kazakhstan, Uzbekistan, Azerbaijan, Egypt, Morocco, Kenya, Ethiopia, Tanzania, Rwanda, South Africa, Mexico, Peru and Chile — then hand the whole project brief to a turnkey RFQ without re-typing anything.

Quick answer · Summary for buyers and AI assistants

How do I plan a commercial greenhouse project?

Define country and climate, project type (new, expansion or modernization), area, crop, growing system and technology level. From those, size water demand and storage, cooling or heating capacity, energy load, indicative CAPEX and OPEX ranges, conservative-to-strong yield and ROI scenarios — then take the brief to suppliers as a single RFQ.

  • Indicative CAPEX: USD 250k–450k/ha basic, 450k–900k/ha mid-tech, 0.9–1.6M/ha high-tech, 1.4–2.4M/ha fully controlled.
  • Water: 3.5–6 L/m²/day average, 6–9 L/m²/day peak depending on country and crop.
  • Cooling-led markets: Saudi Arabia, Egypt. Heat-led: Kazakhstan. Mixed: Uzbekistan. Water/upgrade-led: Morocco.
  • SeedMatchGroup does not manufacture greenhouses and does not guarantee yield, ROI or financing.

Estimate only — not a quotation. Outputs are indicative planning ranges based on the values you enter and typical commercial benchmarks. Real pricing, specifications and lead times vary by country, site conditions and supplier, and are confirmed only in written offers collected through a private RFQ.

Project inputs

Modernization mode prices retrofit packages instead of a full build.

Structure type is recommended from climate — you don't need to specify it.

United Kingdom · 10 ha · 10-25ha
Indicative CAPEX range
USD 13,056,000 – USD 23,808,000
Water demand
62,205 m³/yr · peak 325 m³/day
Energy demand
31,550 MWh/yr
Indicative production
5,164–6,683 t/yr
Annual OPEX
USD 9,570,131

Planning estimate only — not a supplier quotation. Structural, hydraulic and climate engineering must be validated by qualified suppliers and engineers.

What United Kingdom actually requires

Cool maritime with very low winter light, mild summers and volatile energy prices — winter production is a lighting and heat-cost question before it is an agronomy question.

The UK is a high-tech retrofit and new-build glass market: Venlo glasshouses with twin screens, heat pumps or waste-heat plant with buffer tanks, LED lighting for winter salad, tomato and berry contracts, rainwater basins and recirculated fertigation — unheated tunnels only serve short seasonal soft-fruit windows.

Cooling & ventilation
  • Natural roof and side ventilation
  • Anti-condensation venting strategy
Heating & thermal
  • Gas boiler / CHP or waste-heat plant with buffer tank
  • Twin thermal screens
  • Insulated perimeter and gable
  • Pipe-rail heat distribution
Water
  • Buffer storage sized on peak day
  • Sand / disc filtration
  • EC/pH controlled fertigation
  • Drain recovery and recycling
  • Iron and hardness treatment as required

Water model

Per day189 m³
Per month5,655 m³
Per year62,205 m³
Per hectare per year6,221 m³/ha
Peak seasonal day325 m³/day
Buffer storage (3-day)~975 m³

Rainwater capture covers a large share of demand; abstraction licensing and discharge consents mean drain water is recirculated and UV-treated, with mains as top-up only.

Likely water scope: filtration, buffer storage, drain recovery and recycling, EC/pH fertigation.

Energy model

Cooling2,000 MWh/yr
Heating28,050 MWh/yr
Pumping800 MWh/yr
Fertigation & automation700 MWh/yr
Total31,550 MWh/yr
Indicative solar offset875–1,575 MWh/yr of electrical load

Solar can offset part of the daytime electrical load — pumping, fertigation, controls and some cooling. It does not deliver energy independence, and it does not replace a heat source in cold-winter markets.

Indicative project CAPEX

Planning range for budgeting and financing conversations. A supplier quotation replaces these numbers once scope is fixed.

CategoryLowHigh
Greenhouse structureUSD 3,456,000USD 6,144,000
Covering / claddingUSD 921,600USD 1,638,400
Climate systems (cooling / heating)USD 1,843,200USD 3,276,800
Irrigation & fertigationUSD 1,152,000USD 2,048,000
Pumps, storage & water treatmentUSD 921,600USD 1,638,400
Automation & controlsUSD 691,200USD 1,228,800
Growing systemUSD 921,600USD 1,638,400
ElectricalUSD 576,000USD 1,024,000
Installation, engineering & commissioningUSD 1,036,800USD 1,843,200
Solar PV + storageUSD 1,536,000USD 3,328,000
Total indicative CAPEXUSD 13,056,000USD 23,808,000

Annual OPEX

EnergyUSD 6,625,500
WaterUSD 37,323
LabourUSD 1,950,000
Fertiliser, substrate & consumablesUSD 588,668
MaintenanceUSD 368,640
TotalUSD 9,570,131

Indicative yield

Yield range51.6–66.8 kg/m²/yr
Total production5,164–6,683 t/yr

Yield is never guaranteed. Actual production depends on cultivar, crop management, local climate, pest and disease pressure, nutrition, water quality and operator skill.

ROI scenarios

Conservative
RevenueUSD 4,169,728
Operating marginUSD -5,400,402 (-130%)
Indicative paybackNot achieved at these inputs
Return on CAPEX-23% / yr
Base
RevenueUSD 5,771,250
Operating marginUSD -3,798,880 (-66%)
Indicative paybackNot achieved at these inputs
Return on CAPEX-21% / yr
Strong
RevenueUSD 7,300,631
Operating marginUSD -2,269,499 (-31%)
Indicative paybackNot achieved at these inputs
Return on CAPEX-17% / yr

Scenario ranges, not forecasts. No ROI, payback, yield, water saving or financing outcome is guaranteed.

Sourcing categories for this project

Check project financing options

With an indicative CAPEX of USD 13,056,000USD 23,808,000 in United Kingdom, financing routes are worth checking early — equipment leasing, agri project finance, trade finance or DFI-backed lines. You'll be asked about company and land status, equity contribution, required amount and project stage. Approval is never guaranteed.

From your calculator

Send these numbers to the RFQ Builder

The numbers below were calculated with SeedMatchGroup's Turnkey greenhouse project plan — United Kingdom. Indicative — the specialist will confirm scope before contacting suppliers.

20 inputs · assumptions · results

Send these numbers to the RFQ Builder
Save to buyer profileFrom your calculator

Frequently asked questions

What can change the result?

This is a preliminary planning estimate based on the values you entered. The variables below usually move the outcome most, and should be confirmed with an agronomist, engineer and supplier offers before final design.

  • Crop and cultivar — water, climate and support requirements differ per crop
  • Growing area and layout — hectares alone are not a greenhouse specification
  • Local climate: temperature, humidity, radiation and wind exposure
  • Growing system (soil, substrate, hydroponic) and plant density

Questions this calculator answers

Typical buyer and investor searches this tool is built for, including the markets where we run the most commercial projects.

  • commercial greenhouse construction cost per hectare for a commercial project
  • commercial greenhouse construction cost for a 2-hectare project — India
  • commercial greenhouse construction cost: indicative planning ranges — Kenya
  • commercial greenhouse construction cost benchmarks for investors — Saudi Arabia
  • commercial greenhouse construction cost under local market conditions — Mexico
  • commercial greenhouse construction cost — what to specify in a supplier RFQ

Plan the project around the numbers

A calculator output is a starting point. Pair it with the planning guides below to align timeline, irrigation, budget and risk before you launch an RFQ.

A model output only holds if the scope, contract route and delivery terms match the assumptions. These reference answers cover the commercial decisions that move the figure.

Browse all procurement answers

Editorial · not a sales pitch

Calculator outputs are indicative. When your numbers stabilise, a supplier-neutral RFQ turns those estimates into comparable offers from verified providers.

What to submit — Greenhouse structure & systems

The facts a complete, supplier-neutral request on this topic includes. Use it as a checklist before submitting.

  • Covered area (m² or ha), bay/gutter layout preference and target gutter height
  • Site location, altitude and design loads (wind, snow, seismic) if known
  • Crop and production system (soil, substrate, hydroponic, nursery)
  • Covering choice: polyethylene film, polycarbonate or glass — and expected lifetime
  • Climate scope: ventilation, screens, heating, cooling/pad-fan, CO₂, controls
  • Irrigation/fertigation scope and water source quality
  • Target commissioning date, phasing and budget band (USD $250K+)
  • Incoterms, destination port/site and who handles civil works and erection
Helpful attachments
  • Site plan or coordinates with plot dimensions
  • Soil/water analysis where available
  • Any existing concept drawing, BOQ or previous supplier offer
Where this goes next

Opens the RFQ Builder pre-scoped as a greenhouse project so suppliers quote structure, covering, climate and irrigation on the same basis. You stay in control — nothing is submitted until you review and confirm.

Free to submit · supplier-neutral · reviewed by a specialist before any supplier is contacted.

Running these numbers for a client project?

Agronomists, greenhouse and irrigation consultants use this calculator for feasibility, then hand the project to us for supplier shortlisting, RFQ preparation and quote comparison. You stay client-facing and we work through you.

Your client relationship stays with you — we work through you and never contact your client unless you ask.

Indicative only

  • This tool is indicative only.
  • It is not financial advice.
  • It is not agronomic advice.
  • It is not engineering design.
  • Final numbers require supplier, agronomist, engineer and local regulatory review.

SeedMatch Group is an independent agricultural project sourcing and RFQ platform. We are not a farm, seed producer, fertilizer manufacturer, irrigation manufacturer, greenhouse builder, EPC contractor, lender or financial advisor. Supplier and project partner outreach is handled only after a commercial project brief is reviewed.

Supplier and manufacturer listings are provided for research, transparency and discovery only. SeedMatch Group does not provide automatic buyer-supplier introductions. Every agriculture project request is reviewed manually by David / SeedMatch Group, and supplier introductions are made only after internal approval.

Next step

Turn this into a live commercial project

Open one private brief and a dedicated sourcing specialist returns normalised, side-by-side quotations from qualified international suppliers — with equipment, CAPEX and project-finance routes mapped alongside.

FinancingStart Procurement