Plan My Commercial Greenhouse.
One climate-aware planning tool for commercial greenhouse projects from 1 hectare upward. Model water, cooling and heating, energy, CAPEX, OPEX, yield and ROI across 15 priority markets — Saudi Arabia, UAE, Kazakhstan, Uzbekistan, Azerbaijan, Egypt, Morocco, Kenya, Ethiopia, Tanzania, Rwanda, South Africa, Mexico, Peru and Chile — then hand the whole project brief to a turnkey RFQ without re-typing anything.
How do I plan a commercial greenhouse project?
Define country and climate, project type (new, expansion or modernization), area, crop, growing system and technology level. From those, size water demand and storage, cooling or heating capacity, energy load, indicative CAPEX and OPEX ranges, conservative-to-strong yield and ROI scenarios — then take the brief to suppliers as a single RFQ.
- Indicative CAPEX: USD 250k–450k/ha basic, 450k–900k/ha mid-tech, 0.9–1.6M/ha high-tech, 1.4–2.4M/ha fully controlled.
- Water: 3.5–6 L/m²/day average, 6–9 L/m²/day peak depending on country and crop.
- Cooling-led markets: Saudi Arabia, Egypt. Heat-led: Kazakhstan. Mixed: Uzbekistan. Water/upgrade-led: Morocco.
- SeedMatchGroup does not manufacture greenhouses and does not guarantee yield, ROI or financing.
Project inputs
Modernization mode prices retrofit packages instead of a full build.
Structure type is recommended from climate — you don't need to specify it.
Planning estimate only — not a supplier quotation. Structural, hydraulic and climate engineering must be validated by qualified suppliers and engineers.
What Uzbekistan actually requires
Continental with cold winters (−10 to −20 °C) and hot dry summers (38–42 °C). Both heating and summer cooling matter, and existing greenhouse stock is large but energy-inefficient.
Uzbekistan splits into two briefs: new mid- to high-tech multi-span with screens plus summer fogging, and modernization of existing gas-heated houses — where thermal screens, boiler/heat distribution upgrades, automated fertigation and climate control usually pay back fastest.
- • Natural roof and side ventilation
- • Anti-condensation venting strategy
- • Gas boiler / CHP or waste-heat plant with buffer tank
- • Twin thermal screens
- • Insulated perimeter and gable
- • Pipe-rail heat distribution
- • Buffer storage sized on peak day
- • Sand / disc filtration
- • EC/pH controlled fertigation
- • Drain recovery and recycling
- • Iron and hardness treatment as required
Water model
Canal and well supply is common; sediment load makes sand/disc filtration, buffer storage and EC/pH-controlled fertigation the first upgrades on most sites.
Likely water scope: filtration, buffer storage, drain recovery and recycling, EC/pH fertigation.
Energy model
Solar can offset part of the daytime electrical load — pumping, fertigation, controls and some cooling. It does not deliver energy independence, and it does not replace a heat source in cold-winter markets.
Indicative project CAPEX
Planning range for budgeting and financing conversations. A supplier quotation replaces these numbers once scope is fixed.
| Category | Low | High |
|---|---|---|
| Greenhouse structure | USD 2,700,000 | USD 4,800,000 |
| Covering / cladding | USD 720,000 | USD 1,280,000 |
| Climate systems (cooling / heating) | USD 1,440,000 | USD 2,560,000 |
| Irrigation & fertigation | USD 900,000 | USD 1,600,000 |
| Pumps, storage & water treatment | USD 720,000 | USD 1,280,000 |
| Automation & controls | USD 540,000 | USD 960,000 |
| Growing system | USD 720,000 | USD 1,280,000 |
| Electrical | USD 450,000 | USD 800,000 |
| Installation, engineering & commissioning | USD 810,000 | USD 1,440,000 |
| Solar PV + storage | USD 1,200,000 | USD 2,600,000 |
| Total indicative CAPEX | USD 10,200,000 | USD 18,600,000 |
Annual OPEX
Indicative yield
Yield is never guaranteed. Actual production depends on cultivar, crop management, local climate, pest and disease pressure, nutrition, water quality and operator skill.
ROI scenarios
Scenario ranges, not forecasts. No ROI, payback, yield, water saving or financing outcome is guaranteed.
Sourcing categories for this project
Zone layout, emitters and hydraulics for the calculated flow.
OpenEC/pH dosing sized to the daily volume above.
OpenPeak-day flow and pressure for the irrigation loop.
OpenBoiler/CHP capacity, buffer tanks and screen strategy.
OpenFiltration, disinfection and RO polishing where required.
OpenPV and storage sized against the electrical load.
OpenCultivar selection matched to climate and market window.
OpenCheck project financing options
With an indicative CAPEX of USD 10,200,000–USD 18,600,000 in Uzbekistan, financing routes are worth checking early — equipment leasing, agri project finance, trade finance or DFI-backed lines. You'll be asked about company and land status, equity contribution, required amount and project stage. Approval is never guaranteed.
Send these numbers to the RFQ Builder
The numbers below were calculated with SeedMatchGroup's Turnkey greenhouse project plan — Uzbekistan. Indicative — the specialist will confirm scope before contacting suppliers.
20 inputs · assumptions · results
Frequently asked questions
Plan the project around the numbers
A calculator output is a starting point. Pair it with the planning guides below to align timeline, irrigation, budget and risk before you launch an RFQ.
Month-by-month schedule from concept to first harvest across 9 stages.
Design principles for drip, pivot, fertigation and filtration on commercial projects.
How CAPEX, working capital and operating cost drive the project business case.
The ten most expensive planning and procurement pitfalls — and how to avoid them.
Move plan my commercial greenhouse. into a structured RFQ
Editorial · not a sales pitchCalculator outputs are indicative. When your numbers stabilise, a supplier-neutral RFQ turns those estimates into comparable offers from verified providers.
What a complete, supplier-neutral request on this topic usually includes. Use it as a checklist before submitting.
- Project location, scale (hectares / m² / units) and target start window
- Crop, variety class or product category — with any certifications required
- Technical scope: structures, equipment, controls, irrigation, energy
- Delivery terms, incoterms, packaging and destination port or site
- Financing route: equity, senior debt, leasing, ECA, grant — where relevant
Open the builder with the topic pre-selected. You stay in control — nothing is submitted until you review and confirm.
Free to submit · supplier-neutral · reviewed by a specialist before any supplier is contacted.
Estimates Only: This calculator is provided for general informational purposes only. Results are approximate and may contain errors, omissions, or outdated information. They do not constitute legal, financial, engineering, tax, technical, or professional advice. Users are solely responsible for independently verifying all calculations, specifications, prices, regulations, and requirements with qualified professionals before making any decisions. By using this calculator, you acknowledge that the website owners, operators, and affiliates accept no responsibility or liability for any loss, damage, or decisions resulting from its use.